Cumbria · England

Non-Slip Bath Coating in Yanwath

Non-slip bath coating in Yanwath without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Yanwath?

About our non-slip bath coating in Yanwath

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for safety for older or less mobile people and bath mats that harbour mould or get forgotten, on shower trays, enamelled baths and resurfaced baths.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Yanwath (CA10)
Region
Cumbria
Cover
One year on every repair
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Signs you need non-slip bath coating in Yanwath

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The things clients normally mention when they call are:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • What aftercare is recommended
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts
  • How long the guarantee is and what it covers

How to compare quotes

About Yanwath

Yanwath is about 1 mile south of Penrith, in Cumbria. Across the CA10 area, we carry out the work at your property. Yanwath is one of 438 places in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 51 miles away.

Jobs in CA10 are booked in the same way as anywhere else. That includes homes on Hazel Bank Gardens and Squirrel Close and the roads around them. Close by, we cover Eamont Bridge (1 mile north-east), Red Hills (1 mile north-west), Sockbridge (1 mile south-west), Brougham (1 mile east) and Penrith (1 mile north). Further out, we also cover Keswick (15 miles west), Appleby-in-Westmorland (12 miles south-east), Chestnut Hill (15 miles west), Bongate (12 miles south-east) and Shap (9 miles south-east).

Around Yanwath

Locally, our jobs take us to homes close to Castle Park, Queen Elizabeth Grammar School Penrith and Crown Hotel. You will also find Yanwath Primary School (less than half a mile south) and Chapel Of St Wilfred Of Brougham Chapel (1 mile east). Yanwath’s nearest station is Penrith station, roughly 1.3 miles north of the centre. A little further out are Strickland's Pele Tower and Penrith Castle (1.3 miles north) and Cumbria Constabulary Museum (1.2 miles north-east). Green spaces nearby include Heughscar Hill.

Map of Yanwath © OpenStreetMap contributors

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

How to get a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a fixed price

Advice

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Why repair rather than replace?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

Why us?

  • Same prices wherever you are
  • A year’s guarantee on all work
  • We leave the room as we found it
  • Everything repaired in place

See our pricing.

What non-slip bath coating costs

Each job gets its own fixed quote. This is what makes a difference:

  • How hard the colour is to match
  • What the surface is made of
  • Whether we combine several jobs
  • How easy the damage is to reach

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Quotes from your pictures

When you take your photos, these tips help us give you a firm price:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection

The quickest way to a price is to send two or three pictures using our quote form or call us. We will say immediately if a repair is the right fix.

For landlords and businesses

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Yanwath: your questions answered

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Will there be a smell?

There may be a mild smell during the work.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What happens next?

You get a fixed price and available dates. If we need another angle, we will ask.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

What we cannot put right

A repair is not always the answer, and we’d rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.