Somerset · England
Bath Repair for Asney homes
Problem with your bath in Asney? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Rust spots around the plughole
Repair or replace in Asney?
Replacing a fitted bath normally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour-matched on site
- Dust sheets down, tidy finish
- Nothing taken out or refitted
- Typically one visit, start to finish
Take a look at our pricing or bath cost comparison.
How we handle bath repair in Asney
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You won’t need a plumber or tiler, because nothing is disconnected. Common call-outs are for chips on the rim or sides and a chip where the taps sit, across pressed steel enamel, cast iron enamel and roll-top & freestanding.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Asney (BA16)
- Region
- Somerset
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- The material
- How many items we do on one visit
- How much damage there is
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- The material, if you know it
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Questions from Asney
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
What happens once I’ve sent pictures?
We come back with a fixed quote. There is no obligation to book.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can a cracked acrylic bath be fixed?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Honest limits
It helps to know what we can’t do too:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Covering Asney
Asney is about 7 miles south-west of Wells, in Somerset. Whether you’re in the middle of Asney or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 640 places in Somerset.
Postcode districts we cover here: BA16. We also cover the places around Asney: Walton (1 mile south-west), Sharpham (1 mile north), Street (1 mile east), Berhill (1 mile west) and Northover (2 miles north-east). Within a short drive, we also cover Bridgwater (10 miles west), Yeovil (13 miles south), Burnham-on-Sea (12 miles north-west), Wells (7 miles north-east), Shepton Mallet (10 miles north-east) and Glastonbury (3 miles north-east).
Local landmarks in Asney
In Asney, that means homes near Royal Oak pub, Crispin School Academy and Walton Church of England Voluntary Controlled Primary School and the streets around them. Well-known places in the area include Sedgemoor (1.6 miles west) and Shoemakers Museum (1 mile east). For a walk, there’s Glastonbury Tor and Ham Wall.
What else we do in Asney
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath does not move when you stand in it
- Rinse it down after each bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
