Somerset · England
Bath Repair for Northover homes
Local bath repair for Northover: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- A kit repair that didn’t last
Aftercare tips
Looking after the surface is easy:
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
Bath repair at your home in Northover
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the day after. Common call-outs are for a chip where the taps sit and a kit repair that didn’t last, in roll-top & freestanding, pressed steel enamel and cast iron enamel.
Whatever the size of the job, you get the same one-year guarantee in Northover and across Somerset.
- Location
- Northover (BA6, BA16)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Northover
More services for Northover
Northover and the surrounding area
Northover is about 1 mile south-west of Glastonbury, in Somerset. We travel to homes and businesses in Northover and nearby villages, so you don’t need to take anything anywhere. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Our visits in BA6 and BA16 work the same way as everywhere else we cover. We regularly work on streets such as Street Road, Ranger Road and Morland Road and the roads around them. We also travel to Glastonbury (1 mile north-east), Street (1 mile south), Sharpham (1 mile west), Asney (2 miles south-west) and Walton (2 miles south-west). Within a short drive, we also cover Bridgwater (12 miles west), Yeovil (14 miles south), Burnham-on-Sea (13 miles north-west), Wells (6 miles north-east), Midsomer Norton (15 miles north-east) and Shepton Mallet (9 miles east).
Near you in Northover
Our customers here include homes close to Elmhurst Junior School, St Dunstan's Community School and Church of the Holy Trinity, among other places. Other local landmarks include Brewers Fayre pub (under half a mile south-east) and Crispin School Academy (0.7 miles south). Other landmarks nearby include Sedgemoor (2.9 miles west) and Clarks Village (0.9 miles south). Green spaces nearby include Ham Wall and Glastonbury Tor.
When a repair is not the answer
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Common questions in Northover
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you work in Northover?
We do. We send a technician to Northover for every job, and the price is the same as everywhere else.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
What areas do you cover?
We cover the entire UK, including Northover and the rest of Somerset. Just include your postcode and we will confirm dates.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- A year’s guarantee on all work
- One visit for most repairs
- Same prices wherever you are
- A fixed quote before booking
Read our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Northover
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
These are the problems we are asked about most:
- A chipped rim or side
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Chips caused by builders
Comparing quotes
- How long the guarantee is and what it covers
- Who will actually do the work
- What aftercare is recommended
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
