Cumbria · England

Shower tray repair & resurfacing in Bolton, Cumbria

Our repair technicians come to Bolton for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Staining and dullness across the tray
  • Cracks running from the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Bolton

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Shower tray repair at your home in Bolton

We check the tray before repairing it: a tray that moves needs its support sorted first, otherwise any crack returns. We will explain what we find. Typical jobs include scuffs and light scratches and a tray that flexes, on acrylic, cast iron and ceramic.

All of our repairs are guaranteed for twelve months in Bolton and everywhere else. We return to put right any problem with the work.

Stained shower tray resurfaced to clean white, before and after
Area
Bolton (CA16)
Region
Cumbria
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Honest limits

We will always be straight with you, so here’s what a repair will not do:

  • Trays cracked in several places
  • Rotten or damaged flooring underneath
  • Plumbing leaks under the tray

If in doubt, send photos and we’ll say what we think before you book.

Surfaces we repair

  • Ceramic
  • Enamelled steel
  • Cast iron
  • Acrylic
  • Stone resin

When to call us in Bolton

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On concrete, an uneven base is the usual cause.

These are the problems we’re asked about most:

  • Chips on the edges
  • A damaged area around the waste
  • A crack across the base
  • Movement when you stand on it

Questions to ask before booking

  • What aftercare is recommended
  • How the colour is matched
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Our hiring checklist

Repairing versus replacing in Bolton

When the tray is firm and dry underneath, repair is the obvious choice. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why us?

  • A fixed quote before you book
  • We come to you, anywhere in the UK
  • No extra charge for your area
  • A year’s guarantee on all work

See our full price list.

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Clean with washing-up liquid and a soft cloth
  • Ventilate the room after showers
  • Get a moving tray checked
  • Do not use strong acids or bleach

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

Act on split sealant early. It lets water behind the tray and can cause damage underneath.

About Bolton

Bolton is about 9 miles south-east of Penrith, in Cumbria. Jobs in Bolton are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Bolton is one of 438 towns and villages in Cumbria we cover. Our nearest city page is Newcastle upon Tyne, about 45 miles away.

Postcode districts we cover here: CA16. We regularly work on streets such as Grahams Rigg, South End and Chapel Street and the roads around them. Other places close to Bolton include Crackenthorpe (2 miles south-east), Kirkby Thore (2 miles north), King's Meaburn (2 miles south-west), Long Marton (2 miles north-east) and Morland (2 miles west). Further out, we also cover Penrith (9 miles north-west), Appleby-in-Westmorland (3 miles south-east), Fair Hill (9 miles north-west), Carleton (8 miles north-west), Kirkby Stephen (12 miles south-east) and Bongate (4 miles south-east).

Landmarks near Bolton

Around Bolton, we work in homes near Eden Grove School, Bolton Primary School and New Crown Inn and the streets around them. Bolton’s nearest station is Appleby station, roughly 3.3 miles south-east. Nearby you will also find Appleby Castle (3.5 miles south-east) and North Westmorland Rural District (1.9 miles south-east).

Map of Bolton © OpenStreetMap contributors

Common questions in Bolton

What areas do you cover?

Everywhere in the UK, Bolton included. Travel is included in the price.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Can a cracked shower tray be repaired?

Normally, as long as it doesn’t flex. The crack is reinforced, filled and refinished.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Do you work in Bolton?

Yes. We work across the UK and come to Bolton and the rest of Cumbria. Send photos and we’ll quote, or call 0345 017 0787.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Is it OK to use a cracked tray?

Only if you’re sure it is not leaking. Look for damp or stains below.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders in Bolton.

Landlords, agents and businesses in Bolton

For anyone letting property in or around Bolton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

What happens on the day

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours for a repair, longer for a full resurface, and we will keep you posted as we go.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour-matched, or the whole tray gets a new finish.
  5. The tray is left to cure and can normally be used the day after.

Before we arrive

  • Let the surface dry out before the visit
  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire shower tray, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a fixed price

Advice

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.