Cumbria · England

Shower Tray Repair for Bolton Low Houses homes

Local shower tray repair for Bolton Low Houses: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A crack across the base
  • Staining and dullness across the tray
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Bolton Low Houses?

How we handle shower tray repair in Bolton Low Houses

The first thing we do is check the tray: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We will explain what we find. Typical jobs include snagging damage in a new bathroom and a cracked shower tray, across enamelled steel, cast iron and stone resin.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Before and after: an old shower tray refinished by Surface Doctor
Location
Bolton Low Houses (CA7)
Area hub
Cumbria
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

Where we work around Bolton Low Houses

Bolton Low Houses is about 12 miles south-west of Carlisle, in Cumbria. Whether you’re in the middle of Bolton Low Houses or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 438 towns and villages across Cumbria. Our nearest city page is Newcastle upon Tyne, about 63 miles away.

Postcode districts we cover here: CA7. Whether you live on New Street and Howgill Close or a nearby road, we can come to you. We also travel to Brackenlands (2 miles north-east), Fletchertown (2 miles south-west), Waverton (2 miles north-west), Wigton (3 miles north-east) and Oulton (4 miles north). Further out, we also cover Carlisle (12 miles north-east), Maryport (13 miles south-west), Cockermouth (11 miles south-west), Currock (12 miles north-east), Raffles (11 miles north-east) and Keswick (13 miles south).

Local landmarks in Bolton Low Houses

Locally, our jobs take us to homes close to Boltons CofE School and the streets around them. The nearest railway station is Wigton station, roughly 3 miles north of the centre. A little further out are St Mungo's Castle (4.1 miles north-west). Green spaces nearby include Torpenhow Hill.

Map of Bolton Low Houses © OpenStreetMap contributors

Should you replace it?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Our shower tray repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Colour mixed on the day to match
  • Every repair guaranteed for a year
  • One visit for most repairs
  • No extra charge for your area

Read our prices page.

Signs you need shower tray repair in Bolton Low Houses

Cracks often start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

Send us a picture if you notice any of these:

  • A cracked shower tray
  • A damaged area around the waste
  • A dull, stained or worn surface
  • Chipped corners or rims

Questions to ask before you book

  • How to look after the finish
  • What happens if they find more damage
  • Whether the colour is mixed to match
  • What protection goes down before work starts

Our hiring checklist

How it works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, or most of a day for a full resurface. We clean up when we’re done and tell you when it’s ready to use.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage

Ask for a price

To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a fixed price

Read more

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We work for landlords, letting agents and housing providers in Bolton Low Houses as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

What shower tray repair costs

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • How much damage there is
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Two or three clear pictures are generally enough. It helps if you send:

  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • A close-up of the damage, in focus
  • Something in shot to show the size

For a price in Bolton Low Houses, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

When a repair is not the answer

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Rotten or damaged flooring underneath
  • Multiple cracks across the tray
  • Leaks from the waste or pipework (a plumber’s job)

Send us pictures and we’ll tell you honestly before booking.

Materials we work on in Bolton Low Houses

  • Ceramic
  • Cast iron
  • Acrylic
  • Stone resin
  • Enamelled steel

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Aftercare tips

Good habits make a big difference to how long a repair lasts:

  • Use the extractor fan
  • Do not stand heavy bottles on the tray
  • Check the seal every few months
  • Stick to gentle cleaners

Store heavy bottles on a shelf, not on the tray, so they can’t be knocked over.

Do not keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you cannot see.

Questions from Bolton Low Houses

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is a cracked shower tray safe to use?

Not until you know the crack is not letting water through. Check the ceiling below for damp.

Do you reseal the tray as well?

We can. After a repair is a good time to reseal.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.