Pembrokeshire · Wales
Shower Tray Repair for Boulston homes
Fixed-price shower tray repair in Boulston and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chipped corners or rims
- Snagging damage in a new bathroom
Covering Boulston
Boulston is about 3 miles south-east of Haverfordwest, in Pembrokeshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
All of SA62 is within our area. That includes homes on New Road and Cyffin Barn. We also travel to Hook (1 mile south-east), Freystrop (1 mile south-west), Deerland (1 mile south-east), Trooper's Inn (1 mile south-west) and Uzmaston (2 miles north). Further out, we also cover Haverfordwest (3 miles north-west), Milford Haven (6 miles south-west), Pembroke (7 miles south), Pembroke Dock (5 miles south), Dinbych-y-Pysgod (12 miles south-east) and The Green (12 miles south-east).
Near you in Boulston
Our customers here include homes close to New Anchor Inn, Hook C.P. School and Boulston parish church and the streets around them. For rail, the closest station is Haverfordwest station, roughly 2.4 miles north of the centre. A little further out are Picton Castle (2.5 miles north-east) and Picton Castle (2.5 miles north-east). Green spaces nearby include Slebech Park Lake and Boulston Hill.
How we handle shower tray repair in Boulston
Every crack has a cause, and we find it first. A tray that moves needs its support sorting first, so the repair lasts. We regularly repair stone resin, acrylic and cast iron, and common reasons people get in touch are snagging damage in a new bathroom and staining and dullness across the tray.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Boulston (SA62)
- Area hub
- Pembrokeshire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Nearby places to Boulston
Other services in Boulston
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid strong descalers and bleach
- Get a moving tray checked
- Give the tray a quick rinse after use
- Use a mild, non-abrasive cleaner
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water cannot get underneath.
A small crack lets in a little water every time you shower, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.
Landlord and trade work in Boulston
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Common problems we fix in Boulston
Cracks often start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.
Customers usually contact us about:
- Scratches in the surface
- Staining and dullness across the tray
- Chips or cracks by the plughole
- A tray that flexes
Questions to ask before booking
- Whether there are any call-out or travel charges
- What happens if they find more damage
- When it can be used again
- Whether they match the colour on site
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours for a repair, longer for a full resurface. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We make sure the tray doesn’t flex and look for the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- The tray is left to cure and can normally be used the day after.
Preparing for the visit
- Let us know which floor the room is on
- Make sure the area is dry
- Keep children and pets away from the room on the day
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price without visiting.
Related advice
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- A tray broken in more than one place
- Leaks from the waste or pipework (a plumber’s job)
- Movement caused by a poor base, until the support is fixed
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Boulston
- Cast iron
- Acrylic
- Ceramic
- Enamelled steel
- Stone resin
Boulston: your questions answered
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you make an old tray look new?
Yes. The entire tray can be resurfaced.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are there extra charges for Boulston?
Travel is included in the price, and we charge the same wherever you are.
Can you fix a cracked tray?
In most cases. A tray that moves needs its support sorting before the repair.
What your shower tray is made of matters
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- The size and number of damaged areas
- How easy the damage is to reach
- What the surface is made of
- The type of damage
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Getting a price from pictures
Two or three clear pictures are usually enough. It helps if you send:
- One sharp close-up of the damage
- A picture taken from further back
- The postcode, so we can plan the visit
- Natural light rather than flash
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
