Pembrokeshire · Wales
Bath chip & crack repair in Boulston, Pembrokeshire
Our technicians come to Boulston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- Chips along the edge of the bath
How we handle bath repair in Boulston
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with deep scratches in acrylic and a failed DIY repair that’s discoloured or lifting, we can help, on cast iron enamel, acrylic and roll-top & freestanding alike.
Every job is backed for twelve months in Boulston and everywhere else. We return to put right any problem with the work.
- Location
- Boulston (SA62)
- Area hub
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It usually takes a few hours, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Make sure the area is dry
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Boulston: your questions answered
Are there extra charges for Boulston?
We do not add a call-out fee. Your fixed quote includes everything.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Pembrokeshire.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I get a price for bath repair in Boulston?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Landlords, agents and businesses in Boulston
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Nearby places to Boulston
Other services in Boulston
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Common problems we fix in Boulston
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Most people get in touch when they notice something like this:
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
- Rust spots around the plughole
- Scuffs and scratches in the surface
Before you book anyone
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- What protection goes down before work starts
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Avoid scourers, wire wool and gritty cream cleaners
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you’re working above it
- Clean with warm water and a mild detergent
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
What affects the price in Boulston
Repairs from £95. We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- How hard the colour is to match
- Access to the area
- The material
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Any details about the material
For a price in Boulston, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Our work in Boulston
Boulston is about 3 miles south-east of Haverfordwest, in Pembrokeshire. Our repair technicians come to homes and businesses in Boulston and nearby villages, so nothing has to leave your home. Boulston is one of 223 places in Pembrokeshire we cover.
Every address in SA62 is within our area. Whether you live on New Road and Cyffin Barn or anywhere nearby, we can come to you. We also cover the places around Boulston: Hook (1 mile south-east), Freystrop (1 mile south-west), Deerland (1 mile south-east), Trooper's Inn (1 mile south-west) and Uzmaston (2 miles north). Further out, we also cover Haverfordwest (3 miles north-west), Milford Haven (6 miles south-west), Pembroke (7 miles south), Pembroke Dock (5 miles south), Dinbych-y-Pysgod (12 miles south-east) and The Green (12 miles south-east).
Landmarks near Boulston
Our customers here include homes close to New Anchor Inn, Hook C.P. School and Boulston parish church and the streets around them. Boulston’s nearest station is Haverfordwest station, about 2.4 miles north. Other landmarks nearby include Picton Castle (2.5 miles north-east) and Picton Castle (2.5 miles north-east). The countryside around Boulston includes Slebech Park Lake and Boulston Hill.
About our accreditations · Every repair comes with a one-year guarantee.
