Shropshire · England

Shower Tray Repair in Burlton

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Burlton and across Shropshire. Free, fixed quotes from your photos.

  • Repairs from £95
  • A damaged area around the waste
  • Scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Burlton?

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

About our shower tray repair in Burlton

If the whole tray looks tired, we can resurface it, for a clean, uniform finish without removing the screen or tiles. Our technicians work on ceramic, enamelled steel and stone resin, and common reasons people get in touch are damage around the waste and scratches in the surface.

You get a one-year guarantee, the same in Burlton as everywhere else we work.

Area
Burlton (SY4)
Region
Shropshire
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Different materials, different repairs

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and repairs are matched to the gel coat.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

What we can’t put right

A repair isn’t right for every job, for example:

  • Trays cracked in several places
  • Leaks from the waste or pipework (a plumber’s job)
  • Movement caused by a poor base, until the support is fixed

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Ceramic
  • Stone resin
  • Cast iron
  • Acrylic
  • Enamelled steel

How the visit works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, or most of the day to resurface the whole tray from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Ensure the room can be ventilated
  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children

How to get a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Send photos for a quote

Related advice

Repair or replace: which is better?

Replacing a tray usually means removing the screen and tiling, relaying the base and tiling again. Repairing or resurfacing the tray keeps all of that in place. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Burlton. What changes the price is the job itself: the material, the amount of damage and how many items.

Why Burlton clients choose us

  • Colours mixed by hand to suit your surface
  • One price list for the whole UK
  • No need to remove anything
  • A fixed quote before you book

Read our prices page.

FAQs for Burlton

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can you fix a cracked tray?

In most cases. If the tray moves, the support needs fixing first.

Do the materials smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Can you repair something that is been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Can you replace the silicone at the same time?

Yes. Add it to your quote and we’ll do both on one visit.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

How we price shower tray repair

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • The material and finish

The price reflects the work involved, not where you live. You’ll see the full price before you book.

How to get a fixed quote

It only takes a minute to photograph the damage. Try to send:

  • Good light, ideally daylight, without flash glare
  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

If you’re in Burlton and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Covering Burlton

Burlton is about 9 miles north of Shrewsbury, in Shropshire. We visit homes and businesses in Burlton and the surrounding area, so you do not need to take anything anywhere. Burlton is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Burlton to Liverpool (40 miles away).

Jobs in SY4 work the same way as everywhere else we cover. Nearby, we also work in Myddle (2 miles south-east), Marton (2 miles south-west), Weston Lullingfields (2 miles west), Eyton (2 miles south-west) and Loppington (2 miles north-east). Further out, we also cover Shrewsbury (9 miles south), Oswestry (10 miles west), Market Drayton (14 miles east), Coleham (9 miles south), Kingsland (9 miles south) and Whitchurch (11 miles north-east).

Around Burlton

Our customers here include homes close to St Anne's Mission Room. The nearest railway station is Yorton station, about 3.4 miles east. Nearby you will also find Myddle Castle (1.7 miles south-east). The countryside around Burlton includes Sweat Mere.

Map of Burlton © OpenStreetMap contributors

Signs you need shower tray repair in Burlton

Trays fitted on timber floors can crack if the floor moves, particularly if it wasn’t fully bedded. On solid floors, cracks generally point to an uneven base.

You may need us if you’ve spotted any of these:

  • Edge chips from dropped bottles
  • Snagging damage in a new bathroom
  • Chips or cracks by the plughole
  • A cracked shower tray

Comparing quotes

  • What happens if the damage is worse than the photos show
  • Whether cleaning and preparation are in the price
  • How to look after the finish
  • How the colour is matched

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.