Shropshire · England
Bath Re-enamelling in Burlton
Full bath re-enamelling and resurfacing in Burlton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our bath re-enamelling in Burlton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a bath in a colour that no longer suits and an original cast iron bath that needs restoring, across acrylic baths, basins & shower trays and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Burlton (SY4)
- Area hub
- Shropshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- Previous DIY repairs that have to come out
- How many areas need work
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- One picture of the whole bath
- One sharp close-up of the damage
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Where we work around Burlton
Burlton is about 9 miles north of Shrewsbury, in Shropshire. Jobs in Burlton are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover all 433 towns and villages across Shropshire, from the larger towns to small villages. You can also see our page for Liverpool, about 40 miles away.
Postcode districts we cover here: SY4. We also travel to Myddle (2 miles south-east), Marton (2 miles south-west), Weston Lullingfields (2 miles west), Eyton (2 miles south-west) and Loppington (2 miles north-east). Larger places within reach include Shrewsbury (9 miles south), Oswestry (10 miles west), Market Drayton (14 miles east), Coleham (9 miles south), Kingsland (9 miles south) and Whitchurch (11 miles north-east).
Landmarks near Burlton
Our customers here include homes close to St Anne's Mission Room and the streets around them. The nearest railway station is Yorton station, about 3.4 miles east of the centre. A little further out are Myddle Castle (1.7 miles south-east). Green spaces nearby include Sweat Mere.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Places near Burlton
What else we do in Burlton
What we are called out for in Burlton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People typically call us after spotting one of these:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- Lots of chips and rust spots
- Staining under the taps and around the waste
What to look for in a quote
- Aftercare advice
- What happens if they find more damage
- Who turns up on the day
- Is the price fixed, and does it include VAT?
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Open a window if you can
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Common questions in Burlton
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Burlton as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
