North Ayrshire · Scotland
Shower Tray Repair for Burnhouse homes
Fixed-price shower tray repair in Burnhouse and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chipped corners or rims
- Damage from a refit or building work

Common problems we fix in Burnhouse
Trays crack mainly because they move: without a solid, level base underneath, every shower puts strain on it. Chips typically come from dropped bottles.
If you can see any of these, send us a photo:
- A tray that flexes
- Scuffs and light scratches
- Chips or cracks by the plughole
- A crack across the base
Comparing quotes
- How your room will be protected
- Whether the price covers travel
- How long it needs to cure
- Is the price fixed, and does it include VAT?
Shower tray repair in Burnhouse without replacing anything
In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Whether it’s cracks running from the waste and chips or cracks by the plughole, we can help, whatever the material.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Burnhouse (KA15)
- Area hub
- North Ayrshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026

Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Use a mild, non-abrasive cleaner
- Rinse away soap after showering
- Do not use strong acids or bleach
- Keep the bathroom well ventilated
Keep an eye on the sealant, and replace it when it splits or goes black.
Act on split sealant early. Water gets behind and under the tray and can damage the floor below.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours for a repair, longer for a full resurface, tidy-up included.
- First, we check whether the tray moves.
- We clean the damage and open it up so the repair can bond.
- We reinforce any crack and fill the damage.
- The repair is shaped, colour-matched and finished.
- It’s left to cure, normally until the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Clear the area around the damage
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price without visiting.
Advice
What shower tray repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What kind of damage it is
- The material
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- One sharp close-up of the damage
- Details of any past repairs
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Most clients in Burnhouse get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
About Burnhouse
Burnhouse is about 7 miles north-east of Kilwinning, in North Ayrshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We cover all 53 towns and villages across North Ayrshire. We work right across the region, from Burnhouse to Glasgow (15 miles away).
Our technicians cover all of the KA15 postcode area and the streets around it. You will find streets such as Lochlibo Road, Willowpark and Barrmill Road. We also cover the places around Burnhouse: Greenhills (1 mile north-west), Barrmill (1 mile north-west), Dunlop (2 miles east), Gateside (2 miles north-west) and Lugton (2 miles north-east). Further out, we also cover Irvine (7 miles south-west), Kilwinning (7 miles south-west), Saltcoats (10 miles south-west), Largs (12 miles north-west), Ardrossan (10 miles south-west) and Stevenston (9 miles south-west).
Landmarks near Burnhouse
Typical jobs here are in homes near Clandeboye School, among other places. Burnhouse’s nearest station is Dunlop station, roughly 1.7 miles east of the centre. Nearby you’ll also find Barony and Castle of Giffen (0.5 miles north-west) and Stewarton Museum (3.5 miles south-east). For a walk, there is Dunlop Hill and Blae Loch.
Your questions about shower tray repair in Burnhouse
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What does shower tray repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Do you cover Burnhouse?
Yes. We cover the whole UK and come to Burnhouse and the rest of North Ayrshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Can I keep using a cracked tray?
Only if you are sure it is not leaking. Look for damp or stains below.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Places near Burnhouse
More services for Burnhouse
Materials and what they mean for the repair
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Trays cracked in several places
- A tray that moves underfoot
- Damage below the tray that needs a builder
Send us photos and we’ll tell you honestly.
Materials we work on in Burnhouse
- Cast iron
- Ceramic
- Enamelled steel
- Stone resin
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.

