Warwickshire · England

Shower tray repair & resurfacing in Butlers Marston, Warwickshire

Shower tray chip, crack and scratch repairs and resurfacing in Butlers Marston, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Movement when you stand on it
  • Scuffs and light scratches
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Butlers Marston

How it works

We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow a few hours, or most of a day for a full resurface.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. The damaged area, or the entire tray, is cleaned and prepared.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. We colour-match the repair, or spray a new finish across the entire tray.
  5. We leave it to cure; the shower is usually usable the next day.

Getting ready for the visit

  • Let us know which floor the room is on
  • Clear the area around the damage
  • Open a window if you can

Get a quote

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Related advice

How we handle shower tray repair in Butlers Marston

Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We regularly repair cast iron, enamelled steel and stone resin, and common reasons people contact us are a tray that looks tired however much you clean it and a cracked shower tray.

Big or small, you get the same one-year guarantee in Butlers Marston and across Warwickshire.

Where
Butlers Marston (CV35)
Region
Warwickshire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Common problems we fix in Butlers Marston

On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On concrete, an uneven base is the usual cause.

It’s worth getting a quote if you see:

  • A dull, stained or worn surface
  • Damage from a refit or building work
  • Chipped corners or rims
  • Chips or cracks by the plughole

Before you book anyone

  • How long the guarantee is and what it covers
  • Whether a trained technician does the job
  • What prep work is covered
  • What protection goes down before work starts

Our hiring checklist

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Movement caused by a poor base, until the support is fixed
  • Leaking waste fittings
  • Water damage to the floor beneath the tray

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Acrylic
  • Ceramic
  • Stone resin
  • Enamelled steel
  • Cast iron

Repair or replace in Butlers Marston?

Replacing a tray normally means removing the screen and tiling, preparing a new base and tiling again. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • Colour mixed on the day to match
  • CHAS, Constructionline and SafeContractor accredited

See our pricing.

Materials and what they mean for the repair

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and repairs are matched to the gel coat.

Landlords, agents and businesses in Butlers Marston

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Our work in Butlers Marston

Butlers Marston is about 8 miles south-east of Stratford-upon-Avon, in Warwickshire. We visit homes and businesses in Butlers Marston and the surrounding area, so there is no workshop to go to. Butlers Marston is one of 324 places in Warwickshire we cover. Our jobs stretch from Butlers Marston to Birmingham (about 27 miles away).

Postcode districts we cover here: CV35. From Bank View, Town Ground and Bank Close or anywhere nearby, a technician can come to you. Nearby, we also work in Little Kineton (1 mile east), Combrook (1 mile north-west), Pillerton Hersey (1 mile south-west), Kineton (1 mile north-east) and Compton Verney (2 miles north). Larger places within reach include Warwick (9 miles north), Royal Leamington Spa (10 miles north), Stratford-upon-Avon (8 miles north-west), Leamington Spa (10 miles north), Kenilworth (14 miles north) and Southam (10 miles north-east).

Landmarks near Butlers Marston

Locally, our jobs take us to homes close to Kineton High School and Church of Saints Peter and Paul and the streets around them. Further afield, we also cover the area around King John's Castle (0.9 miles north-east) and Compton Verney (1.8 miles north). Not far away are Edge Hill.

Map of Butlers Marston © OpenStreetMap contributors

Your questions about shower tray repair in Butlers Marston

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How long does it take to cure?

Normally by the following day. We will confirm before we leave.

Do you come to Butlers Marston?

We do. We send a technician to Butlers Marston for every job, and the price is the same as everywhere else.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Get a moving tray checked
  • Rinse away soap after showering
  • Don’t stand heavy bottles on the tray
  • Replace failing sealant promptly

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

If the tray creaks or moves, get it checked, before it cracks.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.