Peterborough · England

Shower Tray Repair for Castor homes

Shower tray chip, crack and scratch repairs and resurfacing in Castor, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A tray that creaks or moves underfoot
  • Cracks running from the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Castor?

Shower tray repair at your home in Castor

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Typical jobs include a dull, stained or worn surface and scratches from cleaning or grit, in stone resin, enamelled steel and ceramic.

A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.

Where
Castor (PE5)
County
Peterborough
Warranty
One year on every repair
Price
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What affects the price in Castor

Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Access to the area
  • Whether we combine several jobs
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

What we are called out for in Castor

Cracks frequently start at the waste, where the tray is cut and the fitting is tightened.

Send us a picture if you notice any of these:

  • Damage around the waste
  • A tray that looks tired however much you clean it
  • Chips caused during fitting
  • Cracks running from the waste

Questions to ask before booking

  • How soon you can use it again
  • What the guarantee covers, and for how long
  • What aftercare is recommended
  • What prep work is covered

10 questions to ask before booking

Honest limits

To be straight with you, some problems need a different fix:

  • Leaking waste fittings
  • Movement caused by a poor base, until the support is fixed
  • Trays cracked in several places

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Ceramic
  • Stone resin
  • Cast iron
  • Enamelled steel
  • Acrylic

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a few hours, or most of a day for a full resurface from start to finish. Before we go, we will explain when it can be used and how to care for it.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, normally until the following day.

Before we arrive

  • Keep a parking space free if you can
  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before

How to get a price

To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a fixed price

Related advice

Keeping it looking good

Aftercare is simple:

  • Reseal when the silicone splits or turns black
  • Use the extractor fan
  • Avoid strong descalers and bleach
  • Get a moving tray checked

Rinse the tray down after showering, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.

A small crack lets in a little water every time you shower, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.

Common questions in Castor

Is a cracked tray repairable?

Normally, as long as it doesn’t flex. The crack is reinforced, filled and refinished.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so let us know about it.

How much does shower tray repair cost in Castor?

Repairs from £95. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you quote from photos?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Different materials, different repairs

Acrylic

Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Landlord and trade work in Castor

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Where we work around Castor

Castor is about 4 miles west of Peterborough, in Peterborough. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Our repair technicians cover all 18 towns and villages in Peterborough. We work right across the region, from Castor to Birmingham (65 miles away).

Every address in PE5 is covered, from the main roads to the quietest streets. Whether you live on High Street, Church Hill and Peterborough Road or anywhere nearby, a technician can come to you. If you are just outside Castor, we cover Ailsworth (1 mile north-west), Water Newton (1 mile south-west), Sutton (2 miles west), Alwalton (2 miles south-east) and Orton Waterville (2 miles south-east). Within a short drive, we also cover Peterborough (4 miles east), Woodston (4 miles east), Stanground (5 miles east), Westwood (3 miles east), Eastfield (5 miles east) and Eastgate (5 miles east).

Local landmarks in Castor

Around Castor, we work in homes near Castor CofE Primary School, Prince Of Wales Feathers pub and Church of St Kyneburgha, among other places. For rail, the closest station is Peterborough station, about 3.9 miles east. Nearby you will also find Peterborough Castle (4.4 miles east) and Edith Cavell Healthcare Campus (2.9 miles east). For a walk, there’s Castor Hanglands National Nature Reserve and Orton Mere.

Map of Castor © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.