Cumbria · England

Shower tray repair & resurfacing in Crossgates, Cumbria

Damaged shower tray in Crossgates? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Movement when you stand on it
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Crossgates?

Signs you need shower tray repair in Crossgates

Most cracked trays are trays that flex: if a tray wasn’t bedded on a solid, even base, it flexes each time someone stands on it. Chips normally come from dropped bottles.

You may need us if you’ve spotted any of these:

  • A dull, stained or worn surface
  • Snagging damage in a new bathroom
  • A tray that creaks or moves underfoot
  • A crack across the base

Comparing quotes

  • Whether the price covers travel
  • How soon you can use it again
  • What happens if they find more damage
  • How the room is protected while they work

How to compare quotes

Shower tray repair in Crossgates, done in place

A worn or stained tray can be resurfaced, for a clean, uniform finish without removing the screen or tiles. Typical jobs include a tray that creaks or moves underfoot and chips or cracks by the plughole, on enamelled steel, stone resin and ceramic.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Area
Crossgates (CA14)
Region
Cumbria
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Covering Crossgates

Crossgates is about 6 miles south-east of Workington, in Cumbria. We travel to homes and businesses in Crossgates and nearby villages, so you don’t need to take anything anywhere. Our technicians cover 438 places across Cumbria. Our jobs stretch from Crossgates to Newcastle upon Tyne (about 77 miles away).

We cover every part of the CA14 postcode area. You’ll find Crossgates on the A5086, which makes it straightforward to reach. Other places close to Crossgates include Asby (1 mile south-west), Kirkland (2 miles south), Rowrah (2 miles south-west), Arlecdon (2 miles south-west) and Winder (3 miles south-west). Further out, we also cover Workington (6 miles north-west), Whitehaven (7 miles south-west), Maryport (10 miles north), Cockermouth (6 miles north-east), Keswick (12 miles east) and Moorclose (6 miles north-west).

Landmarks near Crossgates

Around Crossgates, we work in homes near Church of St Michael and the streets around them. A little further out are Hayes Castle (4.7 miles west). The countryside around Crossgates includes Knock Murton and Loweswater.

Map of Crossgates © OpenStreetMap contributors

What shower tray repair costs

Repairs from £95. We charge the same across the UK, including Crossgates. The price reflects:

  • The material
  • How many areas need work
  • Whether old repairs or coatings need taking off
  • What kind of damage it is

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • One sharp close-up of the damage
  • Details of any past repairs
  • A coin beside the damage so we can judge size

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Repair or replace: which is better?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

Why book with us

  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year
  • Work done at your home or business
  • Honest advice, even when it means no job

Read our pricing.

Different materials, different repairs

Acrylic

Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Water damage to the floor beneath the tray
  • A tray broken in more than one place
  • Movement caused by a poor base, until the support is fixed

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Enamelled steel
  • Cast iron
  • Ceramic
  • Stone resin
  • Acrylic

Crossgates questions

Can you resurface a whole tray?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

Can I keep using a cracked tray?

We’d stop using it until it’s repaired, because water may be getting underneath.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you cover Crossgates?

We do. Repair technicians travel to Crossgates from across the region, and the price is the same as everywhere else.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you redo the sealant?

Yes. We can repair and reseal on the same visit.

Can you fix a cracked tray?

In most cases. A tray that moves needs its support sorting before the repair.

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Get a moving tray checked
  • Keep the bathroom well ventilated
  • Don’t use strong acids or bleach
  • Keep heavy bottles on a shelf

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

Landlords, agents and businesses in Crossgates

We are used to working with agents and managing companies. Send the address, photos and access details.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

What we do, step by step

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours for a repair, longer for a full resurface. We clean up when we’re done and let you know when you can use it again.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, typically until the next day.

How to prepare

  • Point us to the nearest place to park
  • Mention if the room is upstairs or in a flat
  • Avoid using the area for a few hours before we arrive

How to get a price

Most clients in Crossgates get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.