Cumbria · England

Bath & shower resealing (mastic) in Crossgates, Cumbria

Bath resealing in and around Crossgates: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Gaps by the taps
  • Gaps in the seal
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Crossgates

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Bath resealing at your home in Crossgates

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We work on kitchen worktops & sinks, shower trays & enclosures and wet rooms, and people most frequently call us about old sealant that looks dirty and gaps by the taps.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Location
Crossgates (CA14)
County
Cumbria
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

The process

Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take around two hours, and you are welcome to carry on with your day while we work.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Preparing for the visit

  • Let us know if it has been repaired before
  • Let us know about parking or access
  • Clear the area around the damage

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job the same day in most cases.

Get a free quote

Advice

Common questions in Crossgates

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you seal over the old sealant?

All the old sealant comes out. Fresh silicone doesn’t stick to old.

Do you come to Crossgates?

Yes, we do. Repair technicians travel to Crossgates from across the region, and the price is the same as everywhere else.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Do you need bath resealing in Crossgates?

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

The most common problems we are called about are:

  • Silicone coming away from the tiles
  • Leaks at the edges
  • Black spots in the silicone
  • Silicone smeared on tiles

Before booking anyone

  • Whether the colour is mixed to match
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work

Choosing a repair company

Where we work around Crossgates

Crossgates is about 6 miles south-east of Workington, in Cumbria. Clients in Crossgates get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Crossgates is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Crossgates to Newcastle upon Tyne (about 77 miles away).

Postcode districts we cover here: CA14. Being close to the A5086, Crossgates is simple for us to get to. Neighbouring places we cover include Asby (1 mile south-west), Kirkland (2 miles south), Rowrah (2 miles south-west), Arlecdon (2 miles south-west) and Winder (3 miles south-west). We also work in nearby towns such as Workington (6 miles north-west), Whitehaven (7 miles south-west), Maryport (10 miles north), Cockermouth (6 miles north-east), Keswick (12 miles east) and Moorclose (6 miles north-west).

Near you in Crossgates

Around Crossgates, we work in homes near Church of St Michael. Other landmarks nearby include Hayes Castle (4.7 miles west). Green spaces nearby include Knock Murton and Loweswater.

Map of Crossgates © OpenStreetMap contributors

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • Whether old repairs or coatings need taking off
  • How much damage there is
  • Unusual colours or finishes
  • What kind of damage it is

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.

Quotes from your photos

Most quotes are done from pictures alone. To make it quick:

  • The material, if you know it
  • Your postcode, so we can check dates
  • Details of any past repairs
  • A close-up of the damage, in focus

To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

What a repair cannot fix

In fairness, some problems need a different fix:

  • A bath or tray that moves, until its support is fixed
  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Crossgates

  • Basins & vanity units
  • Baths
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks

Keeping it looking good

Nothing complicated is needed:

  • Let steam out after showers
  • Give the seal a regular clean
  • Dry the seal after bathing
  • Run the extractor fan during and after showers

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Crossgates

  • Straight answers about what a repair can do
  • A year’s guarantee on all work
  • Rooms protected and left tidy
  • Most jobs done in one visit

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.