North Yorkshire · England
Shower tray repair & resurfacing in Drax, North Yorkshire
Shower tray chip, crack and scratch repairs and resurfacing at your home in Drax, with a one-year guarantee on every repair.
- Repairs from £95
- Cracks running from the waste
- Chips or cracks by the plughole
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Shower tray repair in Drax, done in place
The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We’ll tell you if that’s the case. Typical jobs include scratches in the surface and a tray that creaks or moves underfoot, on ceramic, acrylic and enamelled steel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Drax (YO8)
- Area hub
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price shower tray repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The material
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- Natural light rather than flash
- One picture of the whole shower tray
- One sharp close-up of the damage
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Also in Drax
The process
We agree an arrival time beforehand. On site, it takes a few hours, or most of the day to resurface the whole tray. The room is left tidy.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- We refinish the surface to match the tray.
- We tidy up and tell you when you can shower.
Getting ready for the visit
- Make sure the room can be ventilated
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Get a quote
For a price in Drax, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from the waste or pipework (a plumber’s job)
- Movement caused by a poor base, until the support is fixed
- Damage below the tray that needs a builder
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Ceramic
- Stone resin
- Acrylic
- Cast iron
- Enamelled steel
Drax: your questions answered
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
How do I get a price for shower tray repair in Drax?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do you work in Drax?
Yes. We cover the entire UK and come to Drax. Send us photos for a fixed quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Drax and the surrounding area
Drax is about 5 miles west of Goole, in North Yorkshire. Jobs in Drax are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 626 places in North Yorkshire. Our nearest city page is Leeds, about 24 miles away.
We work across the YO8 postcode area. Local streets include Poplar Gardens, Main Road and Wetherall Close, and we cover them all. We also travel to Long Drax (1 mile north), Newland (2 miles south-east), Barmby on the Marsh (2 miles north-east), Hemingbrough (3 miles north) and Asselby (3 miles east). Within a short drive, we also cover Selby (5 miles north-west), Barlby (5 miles north-west), Brayton (5 miles north-west), Thorpe Willoughby (7 miles north-west), Hambleton (8 miles west) and Cawood (9 miles north-west).
Landmarks near Drax
We visit homes around Church of St Peter and St Paul and Holy Family Catholic High School, among other places. Drax’s nearest station is Rawcliffe station, about 2.9 miles south of the centre. A little further out are Goole and District Hospital (4.5 miles east).
Repairs by material
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so early repairs help.
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
What we’re called out for in Drax
On timber floors, movement can crack a tray, particularly if it wasn’t fully bedded. On concrete, an uneven base is the usual cause.
Typical reasons for a call-out include:
- Damage from a refit or building work
- A dull, stained or worn surface
- Cracks running from the waste
- Scratches in the surface
Before booking anyone
- How changes to the job are handled
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
Aftercare tips
So the finish stays in good condition:
- Stick to gentle cleaners
- Do not stand heavy bottles on the tray
- Keep harsh chemicals off the tray
- Check the seal every few months
Store heavy bottles on a shelf, not on the tray, to avoid chips.
Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.
About our accreditations · Every repair comes with a one-year guarantee.
