North Yorkshire · England

Bath re-enamelling & resurfacing in Drax, North Yorkshire

Full bath re-enamelling and resurfacing for homes and businesses in Drax and across North Yorkshire. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Drax?

Bath re-enamelling in Drax without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are an original cast iron bath that needs restoring and an old resurfacing that’s failing.

You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Area
Drax (YO8)
Region
North Yorkshire
Cover
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What we can’t put right

A few problems are outside what a surface repair can do:

  • Leaking taps or wastes (a plumber’s job)
  • A bath that is rusted through
  • A poorly supported acrylic bath, until it’s firmed up

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Drax

  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops

What happens on the day

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children

Getting a price

Most clients in Drax get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Read more

Materials and what they mean for the repair

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

What bath re-enamelling costs

Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • Any earlier repairs that need removing first
  • How much damage there is
  • The type of damage
  • Where the damage is and how we get to it

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Send photos for a quote

Good pictures mean an accurate price. Here’s what helps:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates

To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly
  • Keep toiletries on a shelf rather than in the bath
  • Don’t let dyes or oils sit on the finish

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Drax and the surrounding area

Drax is about 5 miles west of Goole, in North Yorkshire. Clients in Drax get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 626 towns and villages across North Yorkshire. You can also see our page for Leeds, about 24 miles away.

All of YO8 is covered, from the main roads to the quietest streets. From Poplar Gardens, Main Road and Wetherall Close or a nearby road, we can come to you. Other places close to Drax include Long Drax (1 mile north), Newland (2 miles south-east), Barmby on the Marsh (2 miles north-east), Hemingbrough (3 miles north) and Asselby (3 miles east). Further out, we also cover Selby (5 miles north-west), Barlby (5 miles north-west), Brayton (5 miles north-west), Thorpe Willoughby (7 miles north-west), Hambleton (8 miles west) and Cawood (9 miles north-west).

Around Drax

Typical jobs here are in homes near Church of St Peter and St Paul and Holy Family Catholic High School, among other places. For rail, the closest station is Rawcliffe station, about 2.9 miles south. Well-known places in the area include Goole and District Hospital (4.5 miles east).

Map of Drax © OpenStreetMap contributors

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Why repair rather than replace?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Drax

  • We leave the room as we found it
  • No extra charge for your area
  • CHAS and Constructionline accredited
  • Work done at your home or business

Read our prices page and guide to resurfacing and replacement costs.

Your questions about bath re-enamelling in Drax

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across North Yorkshire.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Do you cover the entire of North Yorkshire?

Everywhere in the UK, Drax included. There’s no extra charge for travel.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What happens next?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What do you need from me?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We regularly work with letting and managing agents. Send the address, pictures and access details.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.