Moray · Scotland

Shower Tray Repair for Fogwatt homes

Fixed-price shower tray repair in Fogwatt and the surrounding area, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Scratches in the surface
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Fogwatt

Repair or replace: which is better?

A new tray can be cheap, but fitting it is not: taking out the enclosure, tiling and resealing. A repair is one visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Usually one visit, start to finish
  • No extra charge for your area
  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before you book

See our prices page.

How we handle shower tray repair in Fogwatt

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. We match the colour and finish so the repair blends in. If you’re dealing with movement when you stand on it and damage from a refit or building work, we can help, on enamelled steel, cast iron and ceramic alike.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Location
Fogwatt (IV30)
Area hub
Moray
Warranty
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

How it works

Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, or most of the day to resurface the whole tray, and we leave the room as we found it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available
  • Tell us about any previous repairs or coatings

Getting a price

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Related advice

Questions from Fogwatt

Is it OK to use a cracked tray?

Only if you are sure it is not leaking. Check the ceiling below for damp.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Are there extra charges for Fogwatt?

No. Our quotes include travel, with the same prices everywhere we work.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

What happens once I’ve sent photos?

You will get a fixed quote back. You’re under no obligation.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

How we price shower tray repair

Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:

  • Unusual colours or finishes
  • The material and finish
  • The type of damage
  • How many items we do on one visit

Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

How to get a fixed price

You can take the photos on your phone, there is no need for anything special. Just make sure we can see:

  • One picture of the whole shower tray
  • The material, if you know it
  • Whether it’s been repaired or coated before
  • Natural light rather than flash

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • A tray broken in more than one place
  • Water damage to the floor beneath the tray
  • Leaking waste fittings

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Enamelled steel
  • Stone resin
  • Cast iron
  • Ceramic
  • Acrylic

Landlords, agents and businesses in Fogwatt

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

When to call us in Fogwatt

Most chips come from things dropped in the shower, typically on the edges or near the plughole.

Get in touch if you’ve noticed:

  • Chipped corners or rims
  • A dull, stained or worn surface
  • Cracks running from the waste
  • A damaged area around the waste

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • How soon you can use it again
  • Whether they match the colour on site
  • What happens if the damage is worse than the photos show

Choosing a repair company

Keeping it looking good

Nothing complicated is needed:

  • Keep the bathroom well ventilated
  • Reseal when the silicone splits or turns black
  • Stick to gentle cleaners
  • Report any creaking or movement early

Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.

A small crack lets in a little water every time you shower, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

Fogwatt and the surrounding area

Fogwatt is about 4 miles south of Elgin, in Moray. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Fogwatt is one of 58 towns and villages in Moray we cover.

Our visits in IV30 are booked in the same way as anywhere else. From Bracany Gardens and Bracany Park or anywhere nearby, a technician can come to you. If you are just outside Fogwatt, we cover Longmorn (1 mile north), Thomshill (1 mile west), Hallowood (2 miles north), Ashgrove (3 miles north) and Blackhills (3 miles north-east). Within a short drive, we also cover Buckie (13 miles north-east), Forres (13 miles west), Lossiemouth (8 miles north), Keith (13 miles east), Burghead (10 miles north-west) and Fochabers (7 miles east). For island and remote addresses, call first so we can plan the visit.

What’s near Fogwatt

The nearest railway station is Elgin station, about 3.4 miles north of the centre. Further afield, we also cover the area around St Giles Centre (3.8 miles north) and Elgin Museum (3.7 miles north). For a walk, there is Findlay's Seat.

Map of Fogwatt © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.