Wrexham · Wales

Shower tray repair & resurfacing in Fron, Wrexham

Shower tray repair across Fron and nearby, typically in one visit and guaranteed for a year.

  • Repairs from £95
  • Chips caused during fitting
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Fron

Shower tray repair at your home in Fron

Before repairing a crack, we find out why it happened. If the tray moves, the support is fixed or flagged before we repair it, so the repair lasts. Our repair technicians work on enamelled steel, ceramic and stone resin, and people most frequently call us about a damaged area around the waste and a tray that flexes.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Where
Fron (LL11)
Region
Wrexham
Cover
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What shower tray repair costs

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • The material and finish
  • How much damage there is
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

We charge the same wherever you are, so there’s no premium for Fron. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed quote

Good photos mean an accurate price. Here’s what helps:

  • One sharp close-up of the damage
  • Something in shot to show the size
  • Your postcode, so we can check dates
  • A picture taken from further back

To get a price, send a couple of photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

When to call us in Fron

Rigid trays do not bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.

Signs it’s time to call us include:

  • Damage around the waste
  • Damage from a refit or building work
  • Cracks running from the waste
  • Staining and dullness across the tray

What to look for in a quote

  • A fixed quote, and whether VAT is included
  • Whether there are any call-out or travel charges
  • How to look after the finish
  • How soon you can use it again

How to compare quotes

Different materials, different repairs

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Wrexham and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We work for landlords, letting agents and housing providers in Fron as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Questions from Fron

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Do you work in Fron?

Yes, we do. We send a technician to Fron for every job, and the price is the same as everywhere else.

How long does it take to cure?

We will give you the curing time on the day.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

When a repair is not the answer

A repair isn’t always the answer, and we would rather say so up front. We can’t fix:

  • Trays cracked in several places
  • Leaking waste fittings
  • Damage below the tray that needs a builder

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Cast iron
  • Ceramic
  • Enamelled steel
  • Acrylic
  • Stone resin

Repair or replace in Fron?

A new tray can be cheap, but fitting it isn’t: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Rooms protected and left tidy
  • Same prices wherever you are
  • Typically one visit, start to finish
  • Every repair guaranteed for a year

Read our pricing.

Fron and the surrounding area

Fron is about 3 miles north-west of Offa, in Wrexham. Customers in Fron get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in all 115 towns and villages in Wrexham, from the larger towns to small villages. You can also see our page for Liverpool, about 25 miles away.

We work across the LL11 postcode area. Nearby, we also work in Tanyfron (1 mile north-east), Coedpoeth (1 mile south-west), Southsea (1 mile east), Gegin (1 mile west) and Brynteg (1 mile east). Larger places within reach include Wrexham (3 miles east), Caia Park (4 miles east), Offa (3 miles south-east), Rhosllannerchrugog (4 miles south), Rhosddu (3 miles east) and Acton (3 miles east).

Near you in Fron

Locally, our jobs take us to homes close to Ysgol Bryn Alyn, Tanyfron C.P. School and Red Lion Inn and the streets around them. Other local landmarks include Church of St Peter (1.2 miles east) and Nant Mill (1.2 miles south). The nearest railway station is Gwersyllt station, roughly 2 miles north-east. Further afield, we also cover the area around Cae Twmpath Fieldname 2 (under half a mile south-east) and Tŷ Pawb (3.1 miles east). For a walk, there is Pen-rhos and Brymbo Pool.

Map of Fron © OpenStreetMap contributors

The process

Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. The repair is colour-matched, or the whole tray gets a new finish.
  5. The tray is left to cure and can generally be used the day after.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available
  • Point us to the nearest place to park

Get a quote

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.