Lincolnshire · England

Shower Tray Repair in Fulletby

Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Fulletby. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A crack across the base
  • Scuffs and light scratches
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Fulletby

What we’re called out for in Fulletby

The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.

If you can see any of these, send us a picture:

  • Damage from a refit or building work
  • A tray that creaks or moves underfoot
  • Damage around the waste
  • A crack across the base

What your quote should include

  • How the room is protected while they work
  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • How the colour is matched

Choosing a repair company

Shower tray repair in Fulletby without replacing anything

We repair plenty of shower trays. Chipped edges, cracks and worn finishes can all be put right without removing the tray. If you’re dealing with movement when you stand on it and a damaged area around the waste, we can normally put it right, whatever the material.

All of our repairs are guaranteed for twelve months in Fulletby and everywhere else. If something goes wrong with the work, we come back.

Where
Fulletby (LN9)
Region
Lincolnshire
Cover
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Landlords, agents and businesses in Fulletby

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Rinse the tray after each shower
  • Replace failing sealant promptly
  • Get a moving tray checked
  • Clean with washing-up liquid and a soft cloth

Keep heavy bottles off the tray floor, so they can’t be knocked over.

A tray that moves underfoot needs looking at, before it cracks.

Covering Fulletby

Fulletby is about 9 miles south of Louth, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 732 towns and villages across Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 73 miles away.

We cover every part of the LN9 postcode area and the streets around it. Jobs here include addresses on High Street, Church Lane and Manor House Lane and the roads around them. We also travel to Belchford (1 mile north), Greetham (2 miles south), Tetford (2 miles east), High Toynton (2 miles south-west) and Scamblesby (3 miles north). Within a short drive, we also cover Louth (9 miles north), Horncastle (3 miles south-west), Mablethorpe (15 miles north-east), Woodhall Spa (9 miles south-west), Sutton on Sea (15 miles east) and Market Rasen (15 miles north-west).

Around Fulletby

In Fulletby, that means homes near Church of St Andrew. Further afield, we also cover the area around War Memorial Hospital (3.2 miles south-west) and Horncastle (3.4 miles south-west). The countryside around Fulletby includes Juicetrump Hill.

Map of Fulletby © OpenStreetMap contributors

FAQs for Fulletby

Can a cracked shower tray be repaired?

Generally, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you cover the whole of Lincolnshire?

Across the UK. Our prices are the same everywhere.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you make an old tray look new?

Yes, it’s a common job. A full resurface makes a tired tray look fresh.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Prices and what affects them

Prices start from £95. You will know the full cost before you book. We take into account:

  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • How much damage there is
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • A close-up of the damage, in focus
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Why repair rather than replace?

Replacing a tray normally involves taking out the enclosure and tiles, relaying the base and tiling again. A repair or resurface keeps all of that in place. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

What you get with us

  • Most jobs done in one visit
  • Honest advice, even when it means no job
  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor

See our prices page.

Honest limits

Before booking, it’s worth knowing the limits:

  • A tray that flexes because it was never properly supported
  • Plumbing leaks under the tray
  • Multiple cracks across the tray

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Fulletby

  • Cast iron
  • Stone resin
  • Enamelled steel
  • Ceramic
  • Acrylic

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

How it works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours, or most of the day to resurface the whole tray. We clean up when we are done and let you know when you can use it again.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. We match the colour, or refinish the full tray.
  5. The tray is left to cure and can generally be used the day after.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift
  • Open a window if you can

Get a quote

If you’re in Fulletby and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.