Wiltshire · England
Shower tray repair & resurfacing in Gasper, Wiltshire
Our repair technicians come to Gasper for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A tray that creaks or moves underfoot
- Staining and dullness across the tray
Shower tray repair in Gasper without replacing anything
Stone resin, acrylic and ceramic trays can all be repaired, or resurface the entire tray if it’s worn. The tray stays in place, so the enclosure and tiles aren’t disturbed. Typical jobs include chips caused during fitting and a dull, stained or worn surface, on cast iron, stone resin and ceramic.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Gasper (BA12)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Gasper
Gasper is about 9 miles south of Frome, in Wiltshire. Anywhere in BA12, we carry out the work at your property. Gasper is one of 425 places in Wiltshire where we work.
Jobs in BA12 are booked in the same way as anywhere else. Other places close to Gasper include Pear Ash (1 mile south), White Cross (1 mile south-east), Penselwood (1 mile south), Zeals (1 mile south-east) and Bourton (2 miles south-east). Larger places within reach include Westbury (13 miles north-east), Warminster (10 miles north-east), Mere (3 miles east), Tisbury (11 miles east), Boreham (10 miles north-east) and North Bradley (15 miles north).
Near you in Gasper
We visit homes around Church of St Peter. For rail, the closest station is Bruton station, about 4.8 miles west of the centre. Other landmarks nearby include Four Towers (1.7 miles west) and Mere Museum (3 miles east). Green spaces nearby include Aaron's Hill.
Common questions in Gasper
Do you come to Gasper?
Yes. We cover the entire UK and travel to Gasper and the rest of Wiltshire. Send photos and we will quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Gasper.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How do I book?
Photos of the damage, a photo of the entire shower tray and your postcode. Then we’ll agree a date.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
What shower tray repair costs
Repairs from £95. There’s no area surcharge for Gasper. What changes the price is:
- How many items we do on one visit
- How easy the damage is to reach
- The material and finish
- How much damage there is
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- Where you are, by postcode
- Any details about the material
- Natural light rather than flash
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Should you replace it?
The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Gasper
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- CHAS and Constructionline accredited
- Colour-matched on site
Read our full price list.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- A tray that moves underfoot
- Leaks from the waste or pipework (a plumber’s job)
- A tray broken in more than one place
If in doubt, send pictures and we will say what we think.
What we work on
- Ceramic
- Acrylic
- Enamelled steel
- Cast iron
- Stone resin
Also near Gasper
Other services in Gasper
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What your shower tray is made of matters
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips are filled and matched to the surface.
Looking after it afterwards
How the surface is treated afterwards matters:
- Avoid strong descalers and bleach
- Store bottles off the tray
- Check the seal every few months
- Get a moving tray checked
Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.
Act on split sealant early. It lets water behind the tray and can cause damage underneath.
Do you need shower tray repair in Gasper?
On timber floors, movement can crack a tray, particularly if it wasn’t fully bedded. On solid floors, cracks generally point to an uneven base.
These are the problems we’re asked about most:
- Scratches from cleaning or grit
- Staining and dullness across the tray
- A damaged area around the waste
- Chipped corners or rims
Comparing quotes
- Whether cleaning and preparation are in the price
- Who will actually do the work
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, or most of a day for a full resurface from start to finish. Before we go, we will explain when it can be used and how to care for it.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
Before we arrive
- Let us know about parking or access
- Let the surface dry out before the visit
- Have a window or extractor fan available
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
