Pembrokeshire · Wales
Shower Tray Repair for Hermon homes
Shower tray chip, crack and scratch repairs and resurfacing at your home in Hermon, with a one-year guarantee on every repair.
- Repairs from £95
- Chipped corners or rims
- A tray that flexes
Should you replace it?
Replacing a tray typically means refitting the screen, retiling and resealing. Repairing it avoids all of that. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Hermon clients choose us
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Colour-matched on site
Read our prices page.
How we handle shower tray repair in Hermon
Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. The colour and finish are matched. We regularly repair enamelled steel, ceramic and acrylic, and the jobs we see most are snagging damage in a new bathroom and damage around the waste.
Big or small, you get the same one-year guarantee.
- Area
- Hermon (SA36)
- Area hub
- Pembrokeshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Hermon
What else we do in Hermon
Questions from Hermon
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Which areas do you work in?
All of Pembrokeshire, and the rest of the UK. Travel is included in the price.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Is it OK to use a cracked tray?
We would stop using it until it’s repaired, in case water is getting through.
Is a cracked tray repairable?
Usually, as long as it does not flex. The crack is reinforced, filled and refinished.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours, or most of a day for a full resurface. Before we leave, we explain how soon it can be used and how to look after it.
- We make sure the tray does not flex and look for the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- The repair is colour-matched, or the entire tray gets a new finish.
- We leave it to cure; the shower is usually usable the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Keeping it looking good
Simple care helps the repair last. Our advice:
- Avoid strong descalers and bleach
- Clean with washing-up liquid and a soft cloth
- Rinse the tray after each shower
- Check the seal every few months
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
Don’t keep using a cracked tray. Water may be getting under the tray, where it causes damage you can’t see.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
When to call us in Hermon
Rigid trays don’t bend, they crack if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.
Common reasons people in Hermon contact us are:
- A tray that creaks or moves underfoot
- Staining and dullness across the tray
- Cracks running from the waste
- Chips on the edges
Comparing quotes
- How the colour is matched
- How to look after the finish
- What happens if they find more damage
- What protection goes down before work starts
Prices and what affects them
Repairs from £95. Prices are worked out job by job. The main factors are:
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
Two or three clear pictures are typically enough. Try to include:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Any details about the material
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire shower tray, we can price the job.
What a repair can’t fix
We will always be straight with you, so here’s what a repair won’t do:
- Movement caused by a poor base, until the support is fixed
- A tray broken in more than one place
- Damage below the tray that needs a builder
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Stone resin
- Ceramic
- Enamelled steel
- Acrylic
- Cast iron
Materials and what they mean for the repair
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Our work in Hermon
Hermon is about 15 miles north-west of Carmarthen, in Pembrokeshire. Whether you are in the middle of Hermon or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 223 places in Pembrokeshire, from the larger towns to small villages.
Every address in SA36 is within our area. We also cover the places around Hermon: Crymych (2 miles north-west), Blaenffos (3 miles north), Capel Colman (4 miles north), Boncath (4 miles north) and Trelech (5 miles east). We also work in nearby towns such as Fishguard and Goodwick (15 miles west), Narberth (12 miles south-west), Narberth Bridge (12 miles south-west), Newport (10 miles north-west) and Lower Town (15 miles west).
What’s near Hermon
In Hermon, that means homes near Church of St Brynach and Lamb Inn, among other places. Further afield, we also cover the area around Llanfyrnach Motte (1 mile east). The countryside around Hermon includes Bryn-eithin.
About our accreditations · Every repair comes with a one-year guarantee.
