Pembrokeshire · Wales

Worktop Repair for Hermon homes

Our technicians come to Hermon for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Burns from hot pans
  • Gouges in the surface
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Hermon homes

Where we work around Hermon

Hermon is about 15 miles north-west of Carmarthen, in Pembrokeshire. From the centre of Hermon to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 223 towns and villages in Pembrokeshire.

Here we cover the SA36 postcode area. Close by, we cover Crymych (2 miles north-west), Blaenffos (3 miles north), Capel Colman (4 miles north), Boncath (4 miles north) and Trelech (5 miles east). Larger places within reach include Fishguard and Goodwick (15 miles west), Narberth (12 miles south-west), Narberth Bridge (12 miles south-west), Newport (10 miles north-west) and Lower Town (15 miles west).

Landmarks near Hermon

Locally, our jobs take us to homes close to Church of St Brynach and Lamb Inn and the streets around them. Nearby you’ll also find Llanfyrnach Motte (1 mile east). Open spaces near Hermon include Bryn-eithin.

Map of Hermon © OpenStreetMap contributors

Worktop repair in Hermon, done in place

We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, with colour and pattern matched by hand. The worktop stays in place. Typical jobs include a chipped quartz edge and snagging damage in a new kitchen, in solid wood, granite & marble and laminate.

We stand behind the work with a one-year guarantee.

Close-up of a technician filling damage on a solid wood worktop
Area
Hermon (SA36)
Region
Pembrokeshire
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Watch the edges with heavy pans
  • Do not cut directly on the worktop
  • Keep wood oiled
  • Always use a trivet for hot pans

Let the repair cure for the time we give you before putting anything heavy or hot on it. After that, trivets and chopping boards are your best protection.

Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.

What your worktop is made of matters

Quartz

Quartz is tough, though edges can chip. We fill chips with a tinted resin and polish them.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

What a repair can’t fix

We’d rather lose a job than do one that will not last, so these are the limits:

  • Through cracks in stone that is moving
  • A top that moves on its units
  • Laminate swollen by water from underneath

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Solid surface (such as Corian)
  • Laminate
  • Granite & marble
  • Solid wood
  • Quartz

FAQs for Hermon

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Do I need to clear the kitchen?

Just near the damage. You can normally still use the rest of the kitchen.

What happens after I send photos?

You get a fixed quote and available dates. If we need another angle, we will ask.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Can a quartz edge be fixed?

Yes. We match the colour and polish the repair.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

Do you work in Hermon?

Yes, we do. We send a technician to Hermon for every job, and the price is the same as everywhere else.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

Signs you need worktop repair in Hermon

Cut-outs for the sink and hob are the weakest parts, and that is where cracks often begin.

Look out for any of the following:

  • Snagging damage in a new kitchen
  • Chips in quartz or granite
  • A damaged sink edge
  • Chips on edges and corners

Questions to ask before you book

  • Whether there are any call-out or travel charges
  • Who turns up on the day
  • When it can be used again
  • What preparation is included

Our hiring checklist

How it works

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a few hours in most cases. We leave the room clean and you’ll know when it can be used.

  1. We protect the rest of the kitchen.
  2. The damage is cleaned and any loose material removed.
  3. It’s filled and levelled with the surface.
  4. The colour and pattern are built up by hand.
  5. We seal and polish it to the right sheen.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Plan for the room to be out of bounds to pets and children
  • Have a window or extractor fan available

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed quote

Read more

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

For anyone letting property in or around Hermon, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Repairing versus replacing in Hermon

Stone and quartz tops are templated and cut to fit, so replacing one section is a big job. Repairing it is a few hours’ work. Our worktop repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.

What you get with us

  • Nothing taken out or refitted
  • A fixed quote before booking
  • We come to you, anywhere in the UK
  • Straight answers about what a repair can do

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.