Doncaster · England

Shower tray repair & resurfacing in Highfields, Doncaster

Problem with your shower tray in Highfields? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Scratches in the surface
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Highfields

Prices and what affects them

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • The colour and finish to match
  • The material

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Where you are, by postcode
  • Details of any past repairs
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Shower tray repair in Highfields without replacing anything

Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. Our repair technicians work on stone resin, cast iron and acrylic, and people most frequently call us about chipped corners or rims and a tray that flexes.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back.

Discoloured square shower tray restored with a new white finish
Area
Highfields (DN6, DN5)
Region
Doncaster
Cover
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A tray that flexes because it was never properly supported
  • Leaking waste fittings
  • Rotten or damaged flooring underneath

If in doubt, send photos and we’ll say what we think.

What we work on

  • Ceramic
  • Enamelled steel
  • Stone resin
  • Acrylic
  • Cast iron

Signs you need shower tray repair in Highfields

Most cracked trays are trays that flex: if a tray wasn’t bedded on a solid, even base, every shower puts strain on it. Chips normally come from dropped bottles.

Clients normally contact us about:

  • Scratches in the surface
  • A dull, stained or worn surface
  • Damage from a refit or building work
  • Chipped corners or rims

What your quote should include

  • Whether the price covers travel
  • How the room is protected while they work
  • Who turns up on the day
  • The length of the guarantee and what it covers

Our hiring checklist

What your shower tray is made of matters

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Highfields questions

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

What happens after I send pictures?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

How long does it take to cure?

Normally by the following day. We’ll tell you the exact time when we finish.

How do I get a price for shower tray repair in Highfields?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

How the visit works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours, or most of the day to resurface the whole tray, and you can get on with other things while we are there.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, typically until the day after.

Getting ready for the visit

  • Clear the area around the damage
  • Let us know if it has been repaired before
  • Tell us about parking, stairs or access

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Send photos for a quote

Advice

Repairing versus replacing in Highfields

Replacing a tray normally means refitting the screen, retiling and resealing. A repair leaves all of that untouched and costs far less. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why Highfields clients choose us

  • We leave the room as we found it
  • Nothing taken out or refitted
  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Our work in Highfields

Highfields is about 1 mile south of Adwick le Street, in Doncaster. We travel to clients in Highfields and the surrounding area, so there’s no workshop to go to. We work in all 89 towns and villages across Doncaster. Our jobs stretch from Highfields to Leeds (23 miles away).

We work across the DN6 and DN5 postcode area and the streets around it. From Lake Road, Ridge Road and Tudor Road or a nearby road, we can come to you. Close by, we cover Woodlands (1 mile north-west), Little Canada (1 mile south), Scawthorpe (1 mile south-east), Sunnyfields (1 mile south) and Tilts (1 mile south). Within a short drive, we also cover Doncaster (4 miles south-east), Thorne (10 miles north-east), Conisbrough (5 miles south), Armthorpe (6 miles east), New Rossington (7 miles south-east) and Intake (4 miles south-east).

Around Highfields

Typical jobs here are in homes near Church of All Saints, Premises Of Woodlands Park Working Mens Club pub and Outwood Academy Adwick. The nearest railway station is Adwick station, roughly 1.2 miles north of the centre. Well-known places in the area include Hangthwaite (0.8 miles east) and Kings Own Yorkshire Light Infantry Museum (3.3 miles south-east). Green spaces nearby include Highfields Lake and Thorpe Marsh Nature Reserve.

Map of Highfields © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.