Worcestershire · England

Shower tray repair & resurfacing in Holt, Worcestershire

Local shower tray repair for Holt: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Cracks running from the waste
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Holt

About our shower tray repair in Holt

You do not always need a new tray. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. Common call-outs are for snagging damage in a new bathroom and chipped corners or rims, across enamelled steel, cast iron and ceramic.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.

Location
Holt (WR6)
County
Worcestershire
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Repairing versus replacing in Holt

A new shower tray frequently means a new enclosure fitting, new tiling and new sealant. Repairing it avoids all of that and costs far less. Our shower tray repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • We’ll tell you if it’s not worth repairing
  • No extra charge for your area
  • One visit for most repairs

Read our pricing.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

For anyone letting property in or around Holt, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.

When a repair is not the answer

Some jobs are not right for a repair, including:

  • Movement caused by a poor base, until the support is fixed
  • Multiple cracks across the tray
  • Water damage to the floor beneath the tray

Send us photos and we’ll tell you honestly.

Materials we repair

  • Stone resin
  • Acrylic
  • Enamelled steel
  • Ceramic
  • Cast iron

What your shower tray is made of matters

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.

Keeping it looking good

Aftercare is simple:

  • Avoid strong descalers and bleach
  • Ventilate the room after showers
  • Report any creaking or movement early
  • Store bottles off the tray

Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.

Every shower forces a little water into a crack, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.

Holt and nearby

Holt is about 6 miles north-west of Worcester, in Worcestershire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We cover 376 places across Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 23 miles away.

Here we cover the WR6 postcode area. We also cover the places around Holt: Ockeridge (1 mile west), Little Witley (1 mile north-west), Hillhampton (2 miles north-west), Hill Side (3 miles west) and Martley (3 miles south-west). We also work in nearby towns such as Worcester (6 miles south-east), Kidderminster (9 miles north), Bromsgrove (11 miles north-east), Great Malvern (10 miles south), Droitwich Spa (6 miles east) and Stourport-on-Severn (6 miles north).

Around Holt

Typical jobs here are in homes near Church of St Michael. A little further out are Holt Castle (2.2 miles east). For a walk, there’s Abberley Hill.

Map of Holt © OpenStreetMap contributors

FAQs for Holt

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Do you come to Holt?

Yes, we do. Repair technicians travel to Holt from across the region, with no extra charge for travel.

Can you resurface a whole tray?

Yes. Resurfacing gives a worn tray an even, clean finish.

When can I use the shower again?

We will give you the curing time on the day, normally the next day.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

What we are called out for in Holt

The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.

The things customers normally mention when they call include:

  • Movement when you stand on it
  • Chips or cracks by the plughole
  • Edge chips from dropped bottles
  • A crack across the base

What your quote should include

  • How soon you can use it again
  • How changes to the job are handled
  • Who turns up on the day
  • What preparation is included

10 questions to ask before booking

How it works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours, or most of the day to resurface the whole tray. We clean up when we’re done and tell you when it’s ready to use.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat

How to get a price

Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Holt, and we will come back with a fixed quote.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.