Isle of Wight · England

Shower Tray Repair for Hulverstone homes

Fixed-price shower tray repair in Hulverstone and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • A tray that creaks or moves underfoot
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Hulverstone

About our shower tray repair in Hulverstone

We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the screen and tiling stay as they are. Our repair technicians work on cast iron, ceramic and enamelled steel, and the jobs we see most are chips caused during fitting and a tray that creaks or moves underfoot.

All our work is covered by our one-year guarantee.

Where
Hulverstone (PO30)
Area hub
Isle of Wight
Cover
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

How to care for the repair

After the repair has cured, a few habits help it last:

  • Do not ignore a tray that flexes
  • Keep the bathroom well ventilated
  • Keep heavy bottles on a shelf
  • Rinse away soap after showering

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.

Repair or replace in Hulverstone?

The tray is usually the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area
  • We leave the room as we found it
  • A fixed quote before you book

Take a look at our full price list.

How the visit works

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a few hours, or most of a day for a full resurface. At the end we talk you through the curing time and the aftercare.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. We refinish the surface to match the tray.
  5. We tidy up and tell you when you can shower.

Getting ready for the visit

  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day
  • Mention any earlier repairs or resurfacing

How to get a price

The quickest way to a price is to send two or three pictures using our quote form or call us. We will say straight away whether it can be repaired.

Get a free quote

Advice

What your shower tray is made of matters

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

Honest limits

To be straight with you, there are a few things a repair won’t fix:

  • Multiple cracks across the tray
  • Water damage to the floor beneath the tray
  • Leaking waste fittings

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Ceramic
  • Stone resin
  • Cast iron
  • Enamelled steel
  • Acrylic

How we price shower tray repair

Prices start from £95. We charge the same across the UK, including Hulverstone. What changes the price is:

  • How many items we do on one visit
  • How much damage there is
  • The material and finish
  • Whether it’s a chip, crack, burn or wear

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • Natural light rather than flash
  • Something in shot to show the size
  • Details of any past repairs
  • A clear, close picture of the problem area

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.

For landlords and businesses

We work for landlords, letting agents and housing providers in Hulverstone as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Where we work around Hulverstone

Hulverstone is about 7 miles south-west of Newport, in Isle of Wight. Clients in Hulverstone get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Hulverstone is one of 125 towns and villages in Isle of Wight we cover.

All of PO30 is within our area, from the main roads to the quietest streets. We also travel to Brookgreen (1 mile south-west), Brook (1 mile west), Dunsbury (1 mile north-west), Shalcombe (1 mile north) and Chilton Green (1 mile south-east). We also work in nearby towns such as Newport (7 miles north-east), Ryde (13 miles east), Cowes (9 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). Remote and island addresses take a little more planning, so it’s best to call first.

Near you in Hulverstone

Our clients here include homes close to St. Mary's Church and the streets around them. A little further out are Brighstone Village Museum (2 miles east) and Yarmouth Castle (4.6 miles north-west). For a walk, there’s Westover Down.

Map of Hulverstone © OpenStreetMap contributors

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Hulverstone: your questions answered

Which areas do you work in?

Everywhere in the UK, Hulverstone included. There is no extra charge for travel.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Is a cracked tray repairable?

In most cases. If the tray moves, the support needs fixing first.

Do you redo the sealant?

Yes. We can repair and reseal on the same visit.

What does shower tray repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can you make an old tray look new?

Yes. We can resurface the entire tray for a fresh finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.