Lancashire · England
Shower Tray Repair for Jack's Mere homes
Fixed-price shower tray repair in Jack's Mere and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips caused during fitting
- Chipped corners or rims
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Plumbing leaks under the tray
- A tray that flexes because it was never properly supported
- Water damage to the floor beneath the tray
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Jack's Mere
- Enamelled steel
- Ceramic
- Stone resin
- Cast iron
- Acrylic
How we handle shower tray repair in Jack's Mere
The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We’ll explain what we find. Typical jobs include scratches in the surface and movement when you stand on it, across cast iron, stone resin and ceramic.
All of our repairs are guaranteed for twelve months in Jack's Mere and everywhere else. We return to put right any problem with the work.
- Where
- Jack's Mere (L40)
- Region
- Lancashire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Jack's Mere
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you reseal the tray as well?
Yes. Add it to your quote and we will do both on one visit.
How do I book?
Use the quote form or ring 0345 017 0787.
Which areas do you work in?
The whole UK, including all of Lancashire. Send your postcode with your photos and we’ll offer you dates.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you resurface a whole tray?
Yes. We can resurface the whole tray for a fresh finish.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Our work in Jack's Mere
Jack's Mere is about 3 miles south-east of Southport, in Lancashire. Jobs in Jack's Mere are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Jack's Mere is one of 482 towns and villages in Lancashire where we work. Our jobs stretch from Jack's Mere to Liverpool (about 14 miles away).
Every address in L40 is within our area. Nearby, we also work in Carr Cross (1 mile north-west), Scarisbrick (1 mile east), Snape Green (1 mile north-east), Shirdley Hill (1 mile south-west) and Bescar (1 mile east). Larger places within reach include Preston (15 miles north-east), Chorley (13 miles east), Lytham St Anne's (10 miles north), Bamber Bridge (14 miles north-east), Leyland (12 miles north-east) and Fulwood (15 miles north-east).
Local landmarks in Jack's Mere
Around Jack's Mere, we work in homes near St. Mark's Church, Master McGraths pub and Scarisbrick St Mark's Church of England Primary School. Other local landmarks include King George V College (2 miles north-west) and Kew Park (1.8 miles north-west). Jack's Mere’s nearest station is Bescar Lane station, about 1.5 miles north-east. Further afield, we also cover the area around British Lawnmower Museum (2.9 miles north-west) and Southport and Formby District General Hospital (1.9 miles north-west). Open spaces near Jack's Mere include WWT Martin Mere and Martin Mere.
Repairing versus replacing in Jack's Mere
Replacing a tray normally means refitting the screen, retiling and resealing. Repairing it avoids all of that and costs far less. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list.
Signs you need shower tray repair in Jack's Mere
On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On solid floors, cracks normally point to an uneven base.
You may need us if you’ve spotted any of these:
- A dull, stained or worn surface
- Cracks running from the waste
- A tray that creaks or moves underfoot
- Damage around the waste
Questions to ask before booking
- Aftercare advice
- What protection goes down before work starts
- What preparation is included
- Whether the price is fixed and includes VAT
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes a few hours, or most of the day to resurface the whole tray, and you can get on with other things while we’re there.
- We make sure the tray does not flex and look for the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- We leave it to cure; the shower is normally usable the next day.
Preparing for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For landlords and businesses
For anyone letting property in or around Jack's Mere, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Places near Jack's Mere
Also in Jack's Mere
What affects the price in Jack's Mere
Repairs from £95. You won’t pay by the hour. The price depends on:
- Doing more than one item at once
- The type of damage
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, with no extra for Jack's Mere. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
You can generally get a fixed price without us visiting. To help us price it:
- Natural light rather than flash
- A close-up of the damage, in focus
- One picture of the whole shower tray
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Repairs by material
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
About our accreditations · Every repair comes with a one-year guarantee.
