North Yorkshire · England

Shower tray repair & resurfacing in Kettlesing, North Yorkshire

Shower tray repair for Kettlesing, without a refit. Send us pictures for a fixed price, then we come to you.

  • Repairs from £95
  • Damage around the waste
  • Snagging damage in a new bathroom
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Kettlesing

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we take into account:

  • The type of damage
  • The size and number of damaged areas
  • The material and finish
  • Unusual colours or finishes

A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Getting a price from pictures

A couple of clear pictures is all it takes. Try to include:

  • Where you are, by postcode
  • The material, if you know it
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

Shower tray repair in Kettlesing without replacing anything

A cracked or chipped shower tray doesn’t always need replacing. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. We regularly repair enamelled steel, cast iron and acrylic, and common reasons people get in touch are chips on the edges and scuffs and light scratches.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Location
Kettlesing (HG3)
Region
North Yorkshire
Cover
One year on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we’re called out for in Kettlesing

Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.

If you can see any of these, send us a photo:

  • Damage from a refit or building work
  • A cracked shower tray
  • Staining and dullness across the tray
  • Damage around the waste

What your quote should include

  • When it can be used again
  • How the room is protected while they work
  • Aftercare advice
  • Whether a trained technician does the job

Choosing a repair company

Looking after it afterwards

So the finish stays in good condition:

  • Store bottles off the tray
  • Rinse the tray after each shower
  • Check the seal every few months
  • Use the extractor fan

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.

Kettlesing questions

Can you repair something that’s been repaired before?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

What happens next?

We come back with a fixed quote, typically with dates to choose from. There is no obligation to book.

Do you redo the sealant?

Yes, if you’d like us to. After a repair is a good time to reseal.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

How long before I can shower?

Normally by the following day. We’ll tell you the exact time when we finish.

Kettlesing and nearby

Kettlesing is about 5 miles west of Harrogate, in North Yorkshire. Wherever you are in the HG3 postcode area, we come to you. Kettlesing is one of 626 places in North Yorkshire where we work. Our nearest city page is Leeds, about 14 miles away.

Our visits in HG3 work the same way as everywhere else we cover. If you’re just outside Kettlesing, we cover Kettlesing Bottom (1 mile north-east), Staupes (1 mile north), Tang (1 mile north-east), Hew Green (1 mile north) and Swarcliffe (2 miles north). Further out, we also cover Harrogate (5 miles east), Knaresborough (8 miles east), Skipton (15 miles west), Ripon (10 miles north-east), Starbeck (6 miles east) and Bilton (5 miles east).

Local landmarks in Kettlesing

Our clients here include homes close to Felliscliffe Chapel of Ease and Kettlesing Felliscliffe Community Primary School, among other places. Well-known places in the area include John O'Gaunt's Castle (1.5 miles south) and Harrogate District Hospital (5.8 miles east).

Map of Kettlesing © OpenStreetMap contributors

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What a repair can’t fix

To be straight with you, there are a few things a repair won’t fix:

  • Damage below the tray that needs a builder
  • Multiple cracks across the tray
  • Leaking waste fittings

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Enamelled steel
  • Acrylic
  • Cast iron
  • Stone resin
  • Ceramic

Repair or replace in Kettlesing?

Trays sit under the screen and tiles, so taking one out disturbs a lot. A repair keeps everything as it is. Our shower tray repair starts from £95. Our prices are the same across the UK, with no extra for Kettlesing. The job itself decides the price: the material, the amount of damage and how many items.

Why choose Surface Doctor in Kettlesing

  • Typically one visit, start to finish
  • Honest advice, even when it means no job
  • Same prices wherever you are
  • Colour-matched on site

Read our prices page.

How the visit works

Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours, or most of the day to resurface the whole tray. Before we go, we’ll explain how long to leave it and how to care for it.

  1. First we check the tray is solid and work out why any crack happened.
  2. The damaged area, or the whole tray, is cleaned and prepared.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. We match the colour, or refinish the full tray.
  5. The tray is left to cure and can typically be used the next day.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before

Ask for a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a fixed quote

Read more

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.