Kent · England
Shower Tray Repair in Martin Mill
Fixed-price shower tray repair in Martin Mill and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage from a refit or building work
- Damage around the waste
Shower tray repair in Martin Mill without replacing anything
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the screen and tiling stay as they are. Our technicians work on stone resin, acrylic and enamelled steel, and the jobs we see most are scuffs and light scratches and a tray that flexes.
Every repair is covered by a one-year guarantee.
- Where
- Martin Mill (CT15)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Martin Mill
Dull and stained trays are generally down to cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.
Keep an eye out for these signs:
- Chips caused during fitting
- A tray that looks tired however much you clean it
- Movement when you stand on it
- A cracked shower tray
Comparing quotes
- Whether cleaning and preparation are in the price
- How to look after the finish
- How the room is protected while they work
- A fixed quote, and whether VAT is included
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse the tray after each shower
- Avoid strong descalers and bleach
- Don’t ignore a tray that flexes
- Check the seal every few months
Store heavy bottles on a shelf, not on the tray, to avoid chips.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- A tray that flexes because it was never properly supported
- Multiple cracks across the tray
- Damage below the tray that needs a builder
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic
- Enamelled steel
- Cast iron
- Ceramic
- Stone resin
About Martin Mill
Martin Mill is about 3 miles north-east of Dover, in Kent. Whether you’re in the middle of Martin Mill or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Martin Mill is one of 922 places in Kent where we work. You can also see our page for London, about 66 miles away.
We work across CT15. From Station Road, Barley Close and Lucerne Lane or anywhere nearby, a technician can come to you. Other places close to Martin Mill include Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Larger places within reach include Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
Landmarks near Martin Mill
Typical jobs here are in homes near Langdon Primary School, Duke of York's Royal Military School and Church of St Augustine, among other places. There’s a railway station in Martin Mill itself: Martin Mill station. Further afield, we also cover the area around Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). The countryside around Martin Mill includes Dover Western Heights.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Martin Mill
More services for Martin Mill
What your shower tray is made of matters
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
How it works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. Allow a few hours, or most of a day for a full resurface, and we’ll keep you posted as we go.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the entire tray.
- The tray is left to cure and can typically be used the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Repair or replace in Martin Mill?
The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Our shower tray repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.
What you get with us
- Rooms protected and left tidy
- One visit for most repairs
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
See our pricing.
FAQs for Martin Mill
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I keep using a cracked tray?
It’s best to stop using it until it’s checked, because water may be getting underneath.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
