Kent · England
Bath Re-enamelling in Martin Mill
Full bath re-enamelling and resurfacing in Martin Mill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- An outdated colour you’d like to change
Bath re-enamelling in Martin Mill, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include thin, worn enamel in places and enamel that’s lost its shine and feels rough, in Victorian roll-tops, pressed steel baths and basins & shower trays.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Martin Mill (CT15)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Repairing versus replacing in Martin Mill
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Martin Mill
- One-year guarantee on every repair
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- No need to remove anything
Read our pricing and resurfacing vs replacement cost guide.
Martin Mill questions
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long is the bath unusable?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Martin Mill and the surrounding area
Martin Mill is about 3 miles north-east of Dover, in Kent. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Martin Mill is one of 922 places in Kent where we work. We work right across the region, from Martin Mill to London (66 miles away).
All of CT15 is within our area. Jobs here include addresses on Station Road, Barley Close and Lucerne Lane. We also cover the places around Martin Mill: Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Larger places within reach include Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
What’s near Martin Mill
Typical jobs here are in homes near Langdon Primary School, Duke of York's Royal Military School and Church of St Augustine and the streets around them. There is a railway station in Martin Mill itself: Martin Mill station. A little further out are Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). Not far away are Dover Western Heights.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Prices and what affects them
Prices start from £350. There’s no area surcharge for Martin Mill. The price reflects:
- Unusual colours or finishes
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- A photo taken from further back
- The postcode, so we can plan the visit
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When to call us in Martin Mill
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Before you book anyone
- How to care for the finish
- How changes to the job are handled
- What preparation is included
- Who turns up on the day
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Nearby places to Martin Mill
Other services in Martin Mill
About our accreditations · Every repair comes with a one-year guarantee.
