Perth and Kinross · Scotland

Shower Tray Repair in Milltown of Aberdalgie

Shower tray chip, crack and scratch repairs and resurfacing at your home in Milltown of Aberdalgie, with a one-year guarantee on every repair.

  • Repairs from £95
  • A cracked shower tray
  • Scratches from cleaning or grit
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Milltown of Aberdalgie

Shower tray repair in Milltown of Aberdalgie, done in place

We check the tray before repairing it: a tray that moves needs its support sorted first, or the crack will come back. We will explain what we find. Typical jobs include chips or cracks by the plughole and movement when you stand on it, in enamelled steel, acrylic and stone resin.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Area
Milltown of Aberdalgie (PH2)
County
Perth and Kinross
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Do you need shower tray repair in Milltown of Aberdalgie?

Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.

Get in touch if you’ve noticed:

  • Edge chips from dropped bottles
  • Snagging damage in a new bathroom
  • Scuffs and light scratches
  • Damage around the waste

Questions to ask before booking

  • Whether the price covers travel
  • A fixed quote, and whether VAT is included
  • How changes to the job are handled
  • What preparation is included

How to compare quotes

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • A tray broken in more than one place
  • Movement caused by a poor base, until the support is fixed
  • Water damage to the floor beneath the tray

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Acrylic
  • Cast iron
  • Stone resin
  • Ceramic
  • Enamelled steel

FAQs for Milltown of Aberdalgie

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you work in Milltown of Aberdalgie?

Yes. We cover the whole UK and come to Milltown of Aberdalgie and the rest of Perth and Kinross. Send pictures and we will quote, or call 0345 017 0787.

Can you fix a cracked tray?

Frequently. A tray that moves needs its support sorting before the repair.

Which areas do you work in?

We cover the entire UK, including Milltown of Aberdalgie and the rest of Perth and Kinross. Send your postcode with your photos and we’ll offer you dates.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

What happens once I’ve sent photos?

You’ll get a fixed quote back. You’re under no obligation.

How long before I can shower?

Normally by the following day. We’ll confirm before we leave.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

Covering Milltown of Aberdalgie

Milltown of Aberdalgie is about 3 miles south-west of Perth, in Perth and Kinross. From the centre of Milltown of Aberdalgie to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 107 towns and villages in Perth and Kinross. Our jobs stretch from Milltown of Aberdalgie to Edinburgh (about 31 miles away).

Postcode districts we cover here: PH2. You’ll find Milltown of Aberdalgie on the B9112, which makes it straightforward to reach. Nearby, we also work in Forgandenny (2 miles south-east), Oakbank (2 miles north-east), Perth (3 miles north-east), Scoonieburn (3 miles east) and Tarsappie (3 miles east). Larger places within reach include Crieff (13 miles west), Auchterarder (9 miles south-west), Kinross (11 miles south), Scone (5 miles north-east), Tulloch (3 miles north) and Coupar Angus (15 miles north-east).

Near you in Milltown of Aberdalgie

We visit homes around Aberdalgie Parish Church and Churchyard and Perth High School. The nearest railway station is Perth station, about 2.8 miles north-east. Further afield, we also cover the area around Dupplin Castle (0.5 miles south-west) and St John's Shopping Centre (3.2 miles north-east). Green spaces nearby include Dupplin Lake and Mailer Hill.

Map of Milltown of Aberdalgie © OpenStreetMap contributors

Repair or replace: which is better?

When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Milltown of Aberdalgie. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • Colour-matched on site

Take a look at our prices page.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What we do, step by step

Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours, or most of a day for a full resurface. Before leaving, we tell you when it can be used and how to care for it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, typically until the next day.

Before we arrive

  • Let us know which floor the room is on
  • Mention any parking restrictions or tricky access
  • Ensure the room can be ventilated

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can price the job without visiting.

Send photos for a quote

Related advice

Landlord and trade work in Milltown of Aberdalgie

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

What your shower tray is made of matters

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so it’s worth repairing early.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Keep the bathroom well ventilated
  • Clean with washing-up liquid and a soft cloth
  • Reseal when the silicone splits or turns black
  • Get a moving tray checked

Rinse the tray after use, use mild, non-abrasive cleaners, and keep an eye on the sealant so water cannot get underneath.

A tray that moves underfoot needs looking at, before it cracks or gets worse.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.