Wiltshire · England

Shower tray repair & resurfacing in Morgan's Vale, Wiltshire

Fixed-price shower tray repair in Morgan's Vale and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A damaged area around the waste
  • Scuffs and light scratches
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Morgan's Vale

What shower tray repair costs

Repairs from £95. We charge the same across the UK, including Morgan's Vale. What changes the price is:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • The size and number of damaged areas
  • How hard the colour is to match

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

Before you send pictures, a few simple things make all the difference:

  • One sharp close-up of the damage
  • Natural light rather than flash
  • The material, if you know it
  • A coin or ruler next to the damage for scale

The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

Shower tray repair at your home in Morgan's Vale

Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. We’re often asked to fix staining and dullness across the tray and snagging damage in a new bathroom, in cast iron, stone resin and enamelled steel.

You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Area
Morgan's Vale (SP5)
County
Wiltshire
Guarantee
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

The process

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours, or most of a day for a full resurface from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, usually until the day after.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Let us know which floor the room is on

How to get a price

For a price in Morgan's Vale, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Why repair rather than replace?

The tray is generally the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. A repair keeps everything as it is. Our shower tray repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • Fixed prices from your photos
  • Colour-matched on site
  • We’ll tell you if it’s not worth repairing
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing.

What your shower tray is made of matters

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips can be filled and matched.

About Morgan's Vale

Morgan's Vale is about 7 miles south-east of Salisbury, in Wiltshire. Whether you are in the middle of Morgan's Vale or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 425 places in Wiltshire, from the larger towns to small villages. You can also see our page for London, about 79 miles away.

Our visits in SP5 work the same way as everywhere else we cover. From The Close, Orchard Road and Appletree Road or anywhere nearby, we can come to you. Neighbouring places we cover include Redlynch (1 mile east), Woodfalls (1 mile south), Lover (1 mile south-east), North Charford (1 mile south) and Hatchet Green (1 mile south). We also work in nearby towns such as Salisbury (7 miles north-west), Amesbury (13 miles north), Bugmore (6 miles north-west), Milford (6 miles north-west), Old Sarum (9 miles north) and Harnham (6 miles north-west).

Local landmarks in Morgan's Vale

We visit homes around Church of St Birinus, The Trafalgar School at Downton and The Kings Head pub. Well-known places in the area include Salisbury District Hospital (4.9 miles north-west) and Downton Moot Close (1 mile west).

Map of Morgan's Vale © OpenStreetMap contributors

Your questions about shower tray repair in Morgan's Vale

What does shower tray repair cost?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Are there extra charges for Morgan's Vale?

Travel is included in the price, with the same prices everywhere we work.

Do the materials smell?

Expect a mild smell while we are working that clears as it cures.

Do you reseal the tray as well?

Yes, if you’d like us to. After a repair is a good time to reseal.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you price it without visiting?

Nearly always. If pictures don’t show enough, we will ask for another angle.

When a repair isn’t the answer

A repair is not right for every job, including:

  • Damage below the tray that needs a builder
  • Plumbing leaks under the tray
  • Trays cracked in several places

Send us pictures and we will tell you honestly.

What we work on

  • Ceramic
  • Acrylic
  • Enamelled steel
  • Cast iron
  • Stone resin

When to call us in Morgan's Vale

A tired-looking tray is often the result of years of cleaning: abrasive pads, strong chemicals and limescale wear the finish away.

Look out for any of the following:

  • Scratches in the surface
  • Cracks running from the waste
  • A tray that creaks or moves underfoot
  • Snagging damage in a new bathroom

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • When it can be used again
  • What the guarantee covers, and for how long
  • If travel is included in the price

Our hiring checklist

Landlord and trade work in Morgan's Vale

Landlords, letting agents and housing providers in Morgan's Vale use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

If you manage property in Morgan's Vale, we’ll quote for several properties at once. Send photos for each one and we will price them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.