North Yorkshire · England

Shower Tray Repair in Old Bilton

Our technicians come to Old Bilton for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A tray that looks tired however much you clean it
  • Chips caused during fitting
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Old Bilton

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Shower tray repair in Old Bilton without replacing anything

You do not always need a new tray. If it’s solid underneath, it can generally be repaired in place, saving you the cost and mess of a new one. We regularly repair enamelled steel, cast iron and acrylic, and the jobs we see most are a tray that looks tired however much you clean it and movement when you stand on it.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Stained shower tray resurfaced to clean white, before and after
Where
Old Bilton (HG1)
County
North Yorkshire
Warranty
12 months on all our work
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

Repair or replace: which is better?

If the tray is solid and the crack hasn’t let water spread, repair is typically best. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why choose Surface Doctor in Old Bilton

  • One visit for most repairs
  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year

Take a look at our prices page.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Report any creaking or movement early
  • Use a mild, non-abrasive cleaner
  • Rinse away soap after showering
  • Reseal when the silicone splits or turns black

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

A tray that moves underfoot needs looking at, before it cracks.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Old Bilton as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

FAQs for Old Bilton

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

What do you need from me?

Photos of the damage, a picture of the entire shower tray and your postcode. Then we will agree a date.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Do you redo the sealant?

Yes, if you’d like us to. After a repair is a good time to reseal.

Do you work in Old Bilton?

We do. Repair technicians travel to Old Bilton from across the region, with no extra charge for travel.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

How long before I can shower?

Typically the day after. We’ll confirm before we leave.

What happens on the day

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours for a repair, longer for a full resurface. Before we go, we will explain when it can be used and how to look after it.

  1. We make sure the tray doesn’t flex and look for the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. We match the colour, or refinish the full tray.
  5. We leave it to cure; the shower is generally usable the following day.

How to prepare

  • Clear the area around the damage
  • Keep a parking space free if you can
  • Let us know about parking or access

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Related advice

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Honest limits

It helps to know what we can’t do too:

  • A tray broken in more than one place
  • Movement caused by a poor base, until the support is fixed
  • Rotten or damaged flooring underneath

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Acrylic
  • Cast iron
  • Enamelled steel
  • Stone resin
  • Ceramic

Our work in Old Bilton

Old Bilton is about 2 miles north-east of Harrogate, in North Yorkshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover all 626 towns and villages in North Yorkshire. Our jobs stretch from Old Bilton to Leeds (14 miles away).

We cover every part of the HG1 postcode area and the streets around it. If you are just outside Old Bilton, we cover Bilton (1 mile south-west), Scotton (1 mile north-east), Knox (2 miles west), Nidd (2 miles north-west) and Brearton (2 miles north). Larger places within reach include Ripon (8 miles north), Tadcaster (14 miles south-east), Easingwold (15 miles north-east), Harlow Hill (3 miles south-west), Boroughbridge (7 miles north-east) and Pannal (4 miles south).

What’s near Old Bilton

Typical jobs here are in homes near Gardener's Arms, The Stray and The Grove Academy. You will also find Parish Church of St John (0.9 miles south-west), Harrogate High School (0.9 miles south) and Richard Taylor Church of England Primary School (0.7 miles south-west). The nearest railway station is Starbeck station, about 1.3 miles south-east of the centre. Well-known places in the area include Knaresborough Castle and Court House Museum (2 miles east) and Victoria Shopping Centre (1.8 miles south-west).

Map of Old Bilton © OpenStreetMap contributors

Signs you need shower tray repair in Old Bilton

Stone resin trays are rigid, so they crack rather than bend if the floor beneath them isn’t flat and fully supported. Timber floors that move can cause it too.

Keep an eye out for these signs:

  • Snagging damage in a new bathroom
  • A tray that looks tired however much you clean it
  • A cracked shower tray
  • Scratches from cleaning or grit

Comparing quotes

  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers
  • Whether cleaning and preparation are in the price
  • How your room will be protected

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.