Worcestershire · England
Shower tray repair & resurfacing in Oldwood, Worcestershire
Problem with your shower tray in Oldwood? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches from cleaning or grit
- A tray that creaks or moves underfoot
Shower tray repair in Oldwood without replacing anything
We repair a lot of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. If you are dealing with a tray that flexes and cracks running from the waste, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Oldwood (WR15)
- County
- Worcestershire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. Repairing it takes one visit. Our shower tray repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
Read our pricing.
What else we do in Oldwood
Honest limits
A few problems are outside what a surface repair can do:
- Leaking waste fittings
- A tray that flexes because it was never properly supported
- Damage below the tray that needs a builder
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Ceramic
- Enamelled steel
- Acrylic
- Stone resin
- Cast iron
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, or most of a day for a full resurface. We tidy up before we leave and let you know when you can use it again.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- We leave it to cure, normally until the following day.
Getting ready for the visit
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
Oldwood and nearby
Oldwood is about 14 miles west of Stourport-on-Severn, in Worcestershire. Jobs in Oldwood are booked in like any other job: a fixed price from your photos, then a visit to do the work. Oldwood is one of 376 towns and villages in Worcestershire where we work. Our jobs stretch from Oldwood to Birmingham (32 miles away).
We work across WR15. Local streets include Oldwood Road, Spring Grove Lane and Saltbox Lane, and we cover them all. We also travel to Nineveh (2 miles south-east), Kyre (3 miles south-east), Bockleton (3 miles south), Bank Street (4 miles south-east) and Grendon Green (6 miles south). We also work in nearby towns such as Stourport-on-Severn (14 miles east), Bewdley (13 miles north-east), Wribbenhall (13 miles north-east), Habberley (15 miles north-east), Areley Kings (13 miles east) and Astley Cross (13 miles east).
What’s near Oldwood
In Oldwood, that means homes near Tenbury CofE Primary School, Tenbury High Ormiston Academy and Fountain Inn and the streets around them. Nearby too are Church of St Michael and All Angels (0.9 miles south-west) and Tenbury High Ormiston Academy (0.5 miles north). Nearby you’ll also find Little Hereford Manor (2.5 miles west).
Common questions in Oldwood
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you resurface a whole tray?
Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.
How long does it take to cure?
You will get the exact time when we finish, typically the day after.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Prices and what affects them
Prices start from £95. There is no charge for travel to Oldwood. The price depends on:
- Where the damage is and how we get to it
- What the surface is made of
- How many areas need work
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, so there’s no premium for Oldwood. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Do you need shower tray repair in Oldwood?
Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
Look out for these signs:
- Chips or cracks by the plughole
- A tray that creaks or moves underfoot
- Scratches from cleaning or grit
- Chips caused during fitting
What to look for in a quote
- Whether the price is fixed and includes VAT
- Who will actually do the work
- What happens if the damage is worse than the photos show
- What prep work is covered
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Ventilate the room after showers
- Store bottles off the tray
- Clean with washing-up liquid and a soft cloth
- Replace failing sealant promptly
Give the repair its full curing time before showering. After that, gentle cleaning and good ventilation keep it in good shape.
A small crack lets in a little water every time you shower, which can damage the floor over time. An early repair is far cheaper than floor repairs.
Different materials, different repairs
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
About our accreditations · Every repair comes with a one-year guarantee.
