Somerset · England

Shower Tray Repair for Radstock homes

Shower tray repair in Radstock without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • Repairs from £95
  • Scratches in the surface
  • Damage around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Radstock

About our shower tray repair in Radstock

We check the tray before repairing it: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We’ll explain what we find. If you’re dealing with a damaged area around the waste and a crack across the base, we can generally put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Radstock (BA3)
Area hub
Somerset
Warranty
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What affects the price in Radstock

Prices start from £95. You won’t pay by the hour. The price depends on:

  • Unusual colours or finishes
  • The material
  • How easy the damage is to reach
  • Any earlier repairs that need removing first

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your photos

We price nearly every job from pictures. This is what to send:

  • Any earlier repairs or coatings
  • Natural light rather than flash
  • Where you are, by postcode
  • A close-up of the damage, in focus

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

Common problems we fix in Radstock

The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.

Clients generally contact us about:

  • Damage from a refit or building work
  • A tray that looks tired however much you clean it
  • Cracks running from the waste
  • Movement when you stand on it

Comparing quotes

  • Whether a trained technician does the job
  • How long it needs to cure
  • Whether they match the colour on site
  • If travel is included in the price

10 questions to ask before you book

Where we work around Radstock

Radstock is about 7 miles north-west of Frome, in Somerset. Jobs in Radstock are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 640 places across Somerset, from the larger towns to small villages.

Postcode districts we cover here: BA3. From Wells Square, The Street and The Dring or a nearby road, we can come to you. You will find Radstock on the A362 and A367, so it’s easy for us to reach. We also cover the places around Radstock: Westfield (1 mile east), Haydon (1 mile south-east), Writhlington (1 mile east), Midsomer Norton (1 mile west) and Lower Writhlington (1 mile east). Further out, we also cover Frome (7 miles south-east), Wells (10 miles south-west), Shepton Mallet (8 miles south-west), Glastonbury (15 miles south-west), Cheddar (14 miles west) and Castle Cary (14 miles south).

Landmarks near Radstock

Locally, our jobs take us to homes close to St Nicholas CofE Primary, The Railway Public House and Parish Church of St Nicholas. Further afield, we also cover the area around Paulton Memorial Hospital (1.8 miles west). The countryside around Radstock includes Stephen's Vale Nature Reserve and Lechmere Water.

Map of Radstock © OpenStreetMap contributors

Keeping it looking good

Once the work has cured, treat it gently:

  • Keep the bathroom well ventilated
  • Give the tray a quick rinse after use
  • Don’t ignore a tray that flexes
  • Clean with washing-up liquid and a soft cloth

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.

Questions from Radstock

Can a stained tray be refinished?

Yes. A full resurface makes a tired tray look fresh.

What happens next?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can you replace the silicone at the same time?

Yes, if you’d like us to. It’s a good time to replace old sealant.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What does shower tray repair cost?

Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What we cannot put right

To be straight with you, some problems need a different fix:

  • Plumbing leaks under the tray
  • A tray broken in more than one place
  • Water damage to the floor beneath the tray

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Radstock

  • Ceramic
  • Enamelled steel
  • Stone resin
  • Acrylic
  • Cast iron

The process

You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a few hours, or most of the day to resurface the whole tray, and you’re welcome to carry on with your day while we work.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, normally until the following day.

Before we arrive

  • Clear the area around the damage
  • Make sure the area is dry
  • Let us know if it has been repaired before

Get a quote

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Send pictures for a quote

Related advice

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Repairs by material

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.

For landlords and businesses

Landlords, letting agents and housing providers in Radstock use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.