Wiltshire · England

Shower Tray Repair for Seend Cleeve homes

Problem with your shower tray in Seend Cleeve? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Chipped corners or rims
  • Chips caused during fitting
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Seend Cleeve

What shower tray repair costs

Prices start from £95. We don’t charge extra for travel to Seend Cleeve. The price comes down to:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • How many areas need work
  • Where the damage is and how we get to it

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Send photos for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • One picture of the whole shower tray
  • Where you are, by postcode
  • What it’s made of, if you know

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Shower tray repair in Seend Cleeve without replacing anything

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. We regularly repair stone resin, cast iron and enamelled steel, and the jobs we see most are staining and dullness across the tray and cracks running from the waste.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.

Where
Seend Cleeve (SN12)
Area hub
Wiltshire
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Common problems we fix in Seend Cleeve

Dull and stained trays are normally down to cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.

Typical reasons for a call-out include:

  • Staining and dullness across the tray
  • Scuffs and light scratches
  • Chipped corners or rims
  • A tray that creaks or moves underfoot

Before you book anyone

  • How your room will be protected
  • Whether the price covers travel
  • What preparation is included
  • How soon you can use it again

Our hiring checklist

Common questions in Seend Cleeve

Do you cover the entire of Wiltshire?

Across the UK, and that includes Seend Cleeve. Prices don’t change with location.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

Is a cracked tray repairable?

Frequently. A tray that moves needs its support sorting before the repair.

What information do you need?

Photos of the damage, a picture of the whole shower tray and your postcode. After that, we just agree a date.

Can I keep using a cracked tray?

Only if you are sure it isn’t leaking. Check the ceiling below for damp.

Can you repair something that is been repaired before?

Usually, yes. The old repair comes out first.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Are there extra charges for Seend Cleeve?

No. Our quotes include travel, and we charge the same wherever you are.

Our work in Seend Cleeve

Seend Cleeve is about 2 miles south-east of Melksham, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 425 places in Wiltshire. Our nearest city page is Birmingham, about 78 miles away.

Every address in SN12 is covered. Jobs here include addresses on Perry's Lane, Pelch Lane and Park Lane. Other places close to Seend Cleeve include Seend (1 mile east), Sells Green (2 miles north-east), Martinslade (2 miles east), Bulkington (2 miles south-east) and Townsend (2 miles south-east). Further out, we also cover Trowbridge (5 miles south-west), Chippenham (8 miles north), Calne (8 miles north-east), Devizes (5 miles east), Westbury (7 miles south-west) and Warminster (11 miles south).

What’s near Seend Cleeve

Around Seend Cleeve, we work in homes near The Barge Inn, Church of the Holy Cross and Melksham Oak Community School and the streets around them. Seend Cleeve’s nearest station is Melksham station, about 2.9 miles north-west. A little further out are Melksham Community Hospital (1.9 miles north-west) and Shane's Castle (4.1 miles east).

Map of Seend Cleeve © OpenStreetMap contributors

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Aftercare tips

Simple care helps the repair last. Our advice:

  • Keep heavy bottles on a shelf
  • Check the seal every few months
  • Rinse the tray after each shower
  • Report any creaking or movement early

Keep an eye on the sealant, and replace it when it splits or goes black.

Don’t keep using a cracked tray. Water can get through to the floor and walls, and the damage below is not visible.

What a repair cannot fix

Some jobs are not right for a repair, for example:

  • Rotten or damaged flooring underneath
  • Multiple cracks across the tray
  • A tray that moves underfoot

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Ceramic
  • Stone resin
  • Acrylic
  • Enamelled steel
  • Cast iron

What happens on the day

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, or most of a day for a full resurface. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Let us know which floor the room is on
  • Keep a parking space free if you can

How to get a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say right away whether it can be repaired.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.