Wiltshire · England
Bath Re-enamelling for Seend Cleeve homes
Local bath re-enamelling for Seend Cleeve: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
How we handle bath re-enamelling in Seend Cleeve
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough, across basins & shower trays, acrylic baths and pressed steel baths.
Big or small, you get the same one-year guarantee.
- Where
- Seend Cleeve (SN12)
- Region
- Wiltshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Seend Cleeve, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
What we’re called out for in Seend Cleeve
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- A bath in a colour that no longer suits
- Wear marks under the taps
- An old resurfacing that’s failing
- A roll-top that’s seen better days
What to look for in a quote
- What preparation is included
- Whether a trained technician does the job
- How to care for the finish
- Whether they match the colour on site
Honest limits
It helps to know what we can’t do too:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Repairing versus replacing in Seend Cleeve
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Work done at your home or business
- Honest advice, even when it means no job
- A year’s guarantee on all work
- A fixed quote before booking
Read our prices page and bath cost comparison.
Seend Cleeve questions
Are there extra charges for Seend Cleeve?
No. Our quotes include travel, and we charge the same wherever you are.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Seend Cleeve and nearby
Seend Cleeve is about 2 miles south-east of Melksham, in Wiltshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Seend Cleeve is one of 425 towns and villages in Wiltshire we cover. We work right across the region, from Seend Cleeve to Birmingham (78 miles away).
Every address in SN12 is within our area. We regularly work on streets such as Perry's Lane, Pelch Lane and Park Lane. If you’re just outside Seend Cleeve, we cover Seend (1 mile east), Sells Green (2 miles north-east), Martinslade (2 miles east), Bulkington (2 miles south-east) and Townsend (2 miles south-east). Larger places within reach include Trowbridge (5 miles south-west), Chippenham (8 miles north), Calne (8 miles north-east), Devizes (5 miles east), Westbury (7 miles south-west) and Warminster (11 miles south).
What’s near Seend Cleeve
Locally, our jobs take us to homes close to The Barge Inn, Church of the Holy Cross and Melksham Oak Community School, among other places. Seend Cleeve’s nearest station is Melksham station, roughly 2.9 miles north-west. Nearby you’ll also find Melksham Community Hospital (1.9 miles north-west) and Shane's Castle (4.1 miles east).
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Towns and villages near Seend Cleeve
Also in Seend Cleeve
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Never use suction bath mats
- Don’t leave a chip unrepaired
- Respect the curing time we give you
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
