Flintshire · England

Shower Tray Repair in Tai-Drill

Shower tray chip, crack and scratch repairs and resurfacing at your home in Tai-Drill, with a one-year guarantee on every repair.

  • Repairs from £95
  • A crack across the base
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Tai-Drill?

Shower tray repair in Tai-Drill without replacing anything

A cracked or chipped shower tray does not always need replacing. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. Whether it’s damage around the waste and edge chips from dropped bottles, we can typically put it right, on cast iron, ceramic and acrylic alike.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.

Area
Tai-Drill (CH8, CH6)
Area hub
Flintshire
Cover
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Your questions about shower tray repair in Tai-Drill

Can I keep using a cracked tray?

We would stop using it until it’s repaired, in case water is getting through.

Can you price it without visiting?

Generally, yes. A close-up and a wider photo are enough to give a fixed price.

Is the work guaranteed?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Can you fix a cracked tray?

Often. A tray that moves needs its support sorting before the repair.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you make an old tray look new?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, or most of a day for a full resurface. We clean up when we are done and tell you when it’s ready to use.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Send pictures for a quote

Read more

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Why repair rather than replace?

A new shower tray often means a new enclosure fitting, new tiling and new sealant. Repairing it avoids all of that and costs far less. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

Why book with us

  • Fixed prices from your photos
  • No extra charge for your area
  • CHAS, Constructionline and SafeContractor accredited
  • We will tell you if it’s not worth repairing

Take a look at our pricing.

Honest limits

We’ll always be straight with you, so here’s what a repair will not do:

  • Damage below the tray that needs a builder
  • A tray broken in more than one place
  • Plumbing leaks under the tray

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Tai-Drill

  • Enamelled steel
  • Stone resin
  • Acrylic
  • Ceramic
  • Cast iron

Landlord and trade work in Tai-Drill

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

Aftercare tips

Looking after the surface is easy:

  • Reseal when the silicone splits or turns black
  • Keep the bathroom well ventilated
  • Use a mild, non-abrasive cleaner
  • Don’t ignore a tray that flexes

Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.

Don’t keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you cannot see.

What we are called out for in Tai-Drill

Most cracked trays are trays that flex: if a tray wasn’t bedded on a solid, even base, it flexes each time someone stands on it. Dropped bottles cause most chips.

You may need us if you’ve spotted:

  • Damage from a refit or building work
  • Chips on the edges
  • A cracked shower tray
  • A tray that looks tired however much you clean it

Comparing quotes

  • What prep work is covered
  • Whether there are any call-out or travel charges
  • What aftercare is recommended
  • What protection goes down before work starts

Our hiring checklist

Where we work around Tai-Drill

Tai-Drill is about 1 mile north-east of Holywell, in Flintshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Tai-Drill is one of 139 towns and villages in Flintshire we cover. You can also see our page for Liverpool, about 14 miles away.

We work across the CH8 and CH6 postcode area. You’ll find streets such as Rayon Road, Mostyn Road and Bala Avenue. Close by, we cover Greenfield (1 mile north-west), Bryncelyn (1 mile south-west), Pen-y-maes (1 mile south), Holywell (1 mile south-west) and Carmel (1 mile west). Within a short drive, we also cover Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (10 miles south-east), Flint (4 miles south-east), Saltney (14 miles south-east) and Mold (9 miles south).

Local landmarks in Tai-Drill

Around Tai-Drill, we work in homes near Greenfield C.P. School, The Ship Inn and Parish Church of St James, among other places. Also close by are Holy Trinity Church (within half a mile north-west) and Ysgol Treffynnon (0.8 miles south-west). For rail, the closest station is Flint station, roughly 3.9 miles south-east. Other landmarks nearby include Basingwerk Manor (under half a mile north-west) and Holywell Community Hospital (1.3 miles south-west). The countryside around Tai-Drill includes Pen y Ball Top.

Map of Tai-Drill © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.