Flintshire · England
Bath Repair in Tai-Drill
Bath repair for Tai-Drill, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
Common problems we fix in Tai-Drill
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
It’s worth getting a quote if you see:
- Rust spots around the plughole
- Snagging damage from a refit
- Chips on the rim or sides
- Scratches you can feel with a fingernail
What to look for in a quote
- How the colour is matched
- What prep work is covered
- What aftercare is recommended
- What the guarantee covers, and for how long
Bath repair in Tai-Drill without replacing anything
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We work on acrylic, cast iron enamel and pressed steel enamel, and common reasons people contact us are damage beneath the taps and rust spots around the plughole.
Every repair comes with our one-year guarantee, wherever you are in Flintshire.
- Area
- Tai-Drill (CH8, CH6)
- County
- Flintshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Tai-Drill
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Flintshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Towns and villages near Tai-Drill
What else we do in Tai-Drill
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- Don’t leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Common questions in Tai-Drill
When can I have a bath again?
Normally by the following day, depending on the repair.
How much does bath repair cost in Tai-Drill?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before you book.
Why Tai-Drill customers choose us
- No need to remove anything
- We will tell you if it’s not worth repairing
- No extra charge for your area
- Usually one visit, start to finish
Take a look at our pricing and guide to resurfacing and replacement costs.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Where we work around Tai-Drill
Tai-Drill is about 1 mile north-east of Holywell, in Flintshire. Clients in Tai-Drill get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Tai-Drill is one of 139 towns and villages in Flintshire we cover. Our jobs stretch from Tai-Drill to Liverpool (14 miles away).
Here we cover the CH8 and CH6 postcode area. Streets in the area include Rayon Road, Mostyn Road and Bala Avenue, all of which we cover. If you are just outside Tai-Drill, we cover Greenfield (1 mile north-west), Bryncelyn (1 mile south-west), Pen-y-maes (1 mile south), Holywell (1 mile south-west) and Carmel (1 mile west). Larger places within reach include Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (10 miles south-east), Flint (4 miles south-east), Saltney (14 miles south-east) and Mold (9 miles south).
What’s near Tai-Drill
Typical jobs here are in homes near Greenfield C.P. School, The Ship Inn and Parish Church of St James and the streets around them. Also close by are Holy Trinity Church (under half a mile north-west) and Ysgol Treffynnon (0.8 miles south-west). The nearest railway station is Flint station, about 3.9 miles south-east of the centre. Nearby you’ll also find Basingwerk Manor (under half a mile north-west) and Holywell Community Hospital (1.3 miles south-west). Green spaces nearby include Pen y Ball Top.
About our accreditations · Every repair comes with a one-year guarantee.
