Perth and Kinross · Scotland

Sink & basin repair in Comrie, Perth and Kinross

We travel to Comrie for chip, crack and resurfacing work on bathroom sinks and basins. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Damage to a basin in a vanity unit
  • Cracks starting at the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair for Comrie homes

Comrie and the surrounding area

Comrie is about 18 miles north of Stirling, in Perth and Kinross. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Comrie is one of 107 places in Perth and Kinross where we work. You can also see our page for Glasgow, about 37 miles away.

Jobs in PH6 are booked in the same way as anywhere else. From Queens Road, Dukes Road and Glebe Road or anywhere nearby, we can come to you. Other places close to Comrie include St Fillans (5 miles west), Crieff (6 miles east), Muthill (7 miles south-east), Gilmerton (7 miles east) and Braco (8 miles south-east).

Near you in Comrie

In Comrie, that means homes near Secession Church. Nearby you will also find Castle Cluggy (4.1 miles east) and Crieff Community Hospital (5.4 miles east). Green spaces nearby include Loch Monzievaird.

Map of Comrie © OpenStreetMap contributors

Sink repair in Comrie without replacing anything

If the whole basin is crazed or worn, we can resurface it in place, for a fresh, even finish. Typical jobs include a period basin that needs restoring and a crack near the taps, on Belfast and butler sinks, enamelled basins and vanity unit basins.

Whatever the size of the job, you get the same one-year guarantee in Comrie and across Perth and Kinross.

Location
Comrie (PH6)
County
Perth and Kinross
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Crack in a basin rim, shown before and after repair

What affects the price in Comrie

Prices start from £95. Prices are worked out job by job. What matters most is:

  • Access to the area
  • How many areas need work
  • Previous DIY repairs that have to come out
  • Unusual colours or finishes

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Getting a price from photos

Phone photos are fine. Just make sure we can see:

  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale

Email us photos of the damage and a wider shot of the whole item, with your PH6 postcode, and we’ll reply with a fixed quote.

Questions from Comrie

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What areas do you cover?

We cover the whole UK, including Comrie and the rest of Perth and Kinross. Send your postcode with your pictures and we’ll confirm dates.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

When we’d advise against a repair

To be straight with you, some problems need a different fix:

  • A basin cracked through and leaking
  • Leaks from the fittings
  • Glaze crazing across the whole basin, where resurfacing is better

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Antique & period basins
  • Enamelled basins
  • Belfast and butler sinks
  • Ceramic & vitreous china basins
  • Vanity unit basins

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

For anyone letting property in or around Comrie, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Should you replace it?

A basin cracked through and leaking needs replacing. For chips, surface cracks and crazing, a repair is usually best. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Comrie

  • Rooms protected and left tidy
  • Everything repaired in place
  • One-year guarantee on every repair
  • Most jobs done in one visit

Take a look at our full price list.

Repairs by material

Vitreous china

Most basins are vitreous china with a hard, glossy glaze. The gloss is what makes a repair blend in, so we polish the repair to suit.

Composite and resin

Many vanity units have resin or composite basins. They repair well, with colour mixed on site.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

What happens on the day

We agree an arrival time beforehand. On site, it takes a couple of hours for most chips. The room is left tidy and you’ll know when it can be used.

  1. We start by cleaning the basin and assessing the damage.
  2. Next we fill the damage and shape it to the basin’s profile.
  3. We mix the colour to suit the glaze.
  4. We polish it into the surrounding surface.
  5. Generally the basin is back in use the same day or the next.

How to prepare

  • Keep a parking space free if you can
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

How to get a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Related advice

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Get chips repaired early
  • Use gentle cleaners
  • Store toiletries on a shelf
  • Fittings shouldn’t be over-tightened

Go gently for the first few days, then stick to mild cleaners. Keep heavy bottles and hot tools away from the rim.

Chips near the waste or taps can let water in. Repairing it early keeps the job small.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.