Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Comrie, Perth and Kinross
Damaged bath in Comrie? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- Staining under the taps and around the waste
How we handle bath re-enamelling in Comrie
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. We’re frequently asked to fix an original cast iron bath that needs restoring and a peeling or bubbling previous coating, on pressed steel baths, acrylic baths and basins & shower trays.
A one-year guarantee comes as standard.
- Location
- Comrie (PH6)
- Region
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Comrie
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Unusual colours or finishes
- How many areas need work
- How many items we do on one visit
- How easy the damage is to reach
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Let us know if it has been repaired before
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Covering Comrie
Comrie is about 18 miles north of Stirling, in Perth and Kinross. Clients in Comrie get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Comrie is one of 107 places in Perth and Kinross we cover. Our jobs stretch from Comrie to Glasgow (37 miles away).
Here we cover the PH6 postcode area. You’ll find streets such as Queens Road, Dukes Road and Glebe Road, all of which we cover. We also travel to St Fillans (5 miles west), Crieff (6 miles east), Muthill (7 miles south-east), Gilmerton (7 miles east) and Braco (8 miles south-east).
Around Comrie
Typical jobs here are in homes near Secession Church. Well-known places in the area include Castle Cluggy (4.1 miles east) and Crieff Community Hospital (5.4 miles east). Open spaces near Comrie include Loch Monzievaird.
Also near Comrie
More services for Comrie
Comrie questions
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Common problems we fix in Comrie
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
These are the problems we’re asked about most:
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions to ask before booking
- How the room is protected while they work
- How the colour is matched
- Who will actually do the work
- What happens if they find more damage
For landlords and businesses
Landlords, letting agents and housing providers in Comrie use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Aftercare tips
To keep it looking its best:
- Do not use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What we can’t put right
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
