Staffordshire · England
Tile Repair in Slitting Mill
Tile repair for Slitting Mill, without a refit. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Chips from dropped pans and tools
- Discontinued tiles you cannot replace
Tile repair at your home in Slitting Mill
A loose or rocking tile may need relaying first, and we will tell you. The tile stays where it is, so you don’t need to find a spare. Typical jobs include chips from dropped pans and tools and drill holes from removed fittings, on porcelain tiles, ceramic tiles and floor and wall tiles.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. Avoid dropping heavy items on repaired floor tiles, and clean with a pH-neutral cleaner.
- Area
- Slitting Mill (WS15)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price tile repair
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Access to the area
- What kind of damage it is
- Previous DIY repairs that have to come out
- Doing more than one item at once
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- One picture of the entire tiled area
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
What we cannot put right
Before booking, it’s worth knowing the limits:
- Loose or hollow tiles that need relaying
- Cracks caused by a moving floor, until the floor is fixed
- Whole walls of failing grout
If in doubt, send pictures and we will say what we think.
Materials we work on in Slitting Mill
- Floor and wall tiles
- Porcelain tiles
- Marble
- Natural stone & granite
- Ceramic tiles
Common problems we fix in Slitting Mill
Floor tiles chip when pans, tins and tools are dropped, while walls end up with drill holes from old fittings. Cracks can also come from movement in the floor below.
It’s worth getting a quote if you see:
- Damaged tile edges
- Discontinued tiles you cannot replace
- Chips from dropped pans and tools
- Cracked floor tiles
What to look for in a quote
- How to look after the finish
- Whether the colour is mixed to match
- What prep work is covered
- Who turns up on the day
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the tile and clearing loose fragments.
- We fill the chip, crack or hole.
- We level and shape the repair to the tile surface.
- The colour and pattern are recreated by hand.
- The repair is sealed to suit the tile’s finish.
Before we arrive
- Clear the area around the damage
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Repairing versus replacing in Slitting Mill
Swapping out a damaged tile involves breaking out the old tile, finding a match and possibly cracking its neighbours. Repairing it keeps the original tile. Our tile repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Slitting Mill
- One price list for the whole UK
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
Read our prices page.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Our work in Slitting Mill
Slitting Mill is about 1 mile west of Rugeley, in Staffordshire. Whether you’re in the middle of Slitting Mill or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Slitting Mill is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 20 miles away.
Jobs in WS15 work the same way as everywhere else we cover. From Oakley Copse, Slitting Mill Road and Post Office Lane or a nearby road, a technician can come to you. Nearby, we also work in Etchinghill (1 mile north), Rugeley (1 mile east), Brereton (2 miles east), Bishton (2 miles north) and Breretonhill (2 miles south-east). Larger places within reach include Stafford (8 miles north-west), Burton upon Trent (14 miles east), Tamworth (15 miles south-east), Cannock (5 miles south-west), Lichfield (7 miles south-east) and Burntwood (5 miles south).
Near you in Slitting Mill
We visit homes around The John Bamford Primary School, St John the Baptist and Fair Oak Academy. The closest station to Slitting Mill is Rugeley Town station, about 0.9 miles east. A little further out are Cannock Chase Hospital (5.2 miles south-west) and Cannock Castle Ring (3 miles south). The countryside around Slitting Mill includes Tixall Wide and Wolseley Centre.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Places near Slitting Mill
Also in Slitting Mill
Slitting Mill: your questions answered
What happens if you find more damage?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent photos?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you repair a cracked floor tile without replacing it?
Often, yes, as long as it’s still firmly stuck down.
What about drill holes in tiles?
Yes. We fill drill holes from removed fittings.
Are there extra charges for Slitting Mill?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
About our accreditations · Every repair comes with a one-year guarantee.
