Warwickshire · England

uPVC Repair for Furnace End homes

Damaged window, door or sill in Furnace End? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Furnace End

uPVC repair in Furnace End, done in place

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. We’re often asked to fix burns on sills and damage during building work, on coloured and woodgrain uPVC, window frames & sills and conservatory frames.

We stand behind the work with a one-year guarantee. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Damaged white panel edge repaired, before and after
Area
Furnace End (B46)
Region
Warwickshire
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

If you manage property in Furnace End, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Common questions in Furnace End

Do you cover the whole of Warwickshire?

We cover the entire UK, including Furnace End and the rest of Warwickshire. Send your postcode with your photos and we’ll offer you dates.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What do you need from me?

Photos of the damage, a photo of the entire window, door or sill and your postcode. After that, we just agree a date.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do you repair coloured uPVC?

Yes. We recreate the colour and grain by hand.

Can you price it without visiting?

In nearly every case. If pictures do not show enough, we will ask for another angle.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Do you need uPVC repair in Furnace End?

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

It’s worth getting a quote if you see:

  • Holes from removed fittings and alarms
  • Burns on sills
  • Damage during building work
  • Scratches from ladders and furniture

What to look for in a quote

  • What preparation is included
  • Whether the colour is mixed to match
  • What happens if the damage is worse than the photos show
  • How to care for the finish

10 questions to ask before you book

Repair or replace: which is better?

Replacing the frame or sill costs far more, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

What you get with us

  • No extra charge for your area
  • We leave the room as we found it
  • Honest advice, even when it means no job
  • Everything repaired in place

Read our full price list.

Prices and what affects them

Repairs from £95. You will know the full cost before booking. We look at:

  • The colour and finish to match
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs

Our prices are the same across the UK, so there is no premium for Furnace End. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from photos

Before you send pictures, these tips help us give you a firm price:

  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • One picture of the whole window, door or sill

The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.

When we would advise against a repair

A repair isn’t right for every job, including:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Doors & door panels
  • Window frames & sills
  • White uPVC
  • Conservatory frames
  • Coloured and woodgrain uPVC

How the visit works

You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, and you can get on with other things while we are there.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. Finally we blend it into the rest of the frame.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area
  • Ensure the area is dry

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the window, door or sill, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Advice

Where we work around Furnace End

Furnace End is about 7 miles west of Nuneaton, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 324 towns and villages across Warwickshire. Our jobs stretch from Furnace End to Birmingham (11 miles away).

Here we cover the B46 postcode area. Whether you live on Nuneaton Road and Bray Bank or anywhere nearby, a technician can come to you. Neighbouring places we cover include Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). Within a short drive, we also cover Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).

Near you in Furnace End

Our customers here include homes close to Church of St Leonard, among other places. Furnace End’s nearest station is Coleshill Parkway station, about 3.2 miles west. Further afield, we also cover the area around Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). For a walk, there is Ladywalk Reserve.

Map of Furnace End © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.