Warwickshire · England
Bath Re-enamelling in Furnace End
Full bath re-enamelling and resurfacing for homes and businesses in Furnace End and across Warwickshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Bath re-enamelling in Furnace End without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with an old resurfacing that’s failing and worn patches where water runs and sits, we can help, whatever the material.
All our work comes with our one-year guarantee.
- Where
- Furnace End (B46)
- County
- Warwickshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Send us pictures and we will tell you honestly before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
Before we arrive
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Landlord and trade work in Furnace End
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Furnace End as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Furnace End: your questions answered
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- How many items we do on one visit
- How much damage there is
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send photos for a quote
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Furnace End
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- Everything repaired in place
- Work done at your home or business
Read our full price list and resurfacing vs replacement cost guide.
Places near Furnace End
Other services in Furnace End
Where we work around Furnace End
Furnace End is about 7 miles west of Nuneaton, in Warwickshire. Our technicians come to clients in Furnace End and nearby villages, so you don’t need to take anything anywhere. Furnace End is one of 324 towns and villages in Warwickshire where we work. Our nearest city page is Birmingham, about 11 miles away.
Our visits in B46 are booked in the same way as anywhere else. Local streets include Nuneaton Road and Bray Bank. Other places close to Furnace End include Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). Within a short drive, we also cover Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).
Near you in Furnace End
Locally, our jobs take us to homes close to Church of St Leonard. For rail, the closest station is Coleshill Parkway station, about 3.2 miles west of the centre. Further afield, we also cover the area around Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). The countryside around Furnace End includes Ladywalk Reserve.
Signs you need bath re-enamelling in Furnace End
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
The things customers typically mention when they call are:
- Several chips and rust patches
- An old resurfacing that’s failing
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
What to look for in a quote
- What happens if they find more damage
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
Aftercare tips
Most damage we see is avoidable. These habits help:
- Do not use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs immediately
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
