Warwickshire · England
Shower tray repair & resurfacing in Furnace End, Warwickshire
Damaged shower tray in Furnace End? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches from cleaning or grit
- A dull, stained or worn surface
How we handle shower tray repair in Furnace End
The first thing we do is check the tray: a tray that moves needs its support sorted first, otherwise any crack returns. We will tell you if that is the case. Typical jobs include scratches from cleaning or grit and cracks running from the waste, on acrylic, stone resin and cast iron.
Every job is backed for twelve months in Furnace End and everywhere else. If something goes wrong with the work, we come back.
- Location
- Furnace End (B46)
- Region
- Warwickshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Towns and villages near Furnace End
More services for Furnace End
Different materials, different repairs
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Leaks from the waste or pipework (a plumber’s job)
- Water damage to the floor beneath the tray
- Multiple cracks across the tray
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Ceramic
- Cast iron
- Stone resin
- Enamelled steel
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, or most of the day to resurface the whole tray. We tidy up before we leave and tell you when it’s ready to use.
- We check the tray is firmly supported and find the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the entire tray.
- Once cured, generally by the day after, you can use the shower.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
For a price in Furnace End, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Landlord and trade work in Furnace End
We regularly work with letting and managing agents. Send the address, pictures and access details.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
How we price shower tray repair
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The size and number of damaged areas
- How easy the damage is to reach
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- One picture of the whole shower tray
- Details of any past repairs
- Any details about the material
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price the same day in most cases.
FAQs for Furnace End
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is a cracked shower tray safe to use?
Not until you know the crack is not letting water through. Check the ceiling below for damp.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you redo the sealant?
We can. It’s a good time to replace old sealant.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Is a cracked tray repairable?
Normally, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
When to call us in Furnace End
Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.
The things customers generally mention when they call include:
- Chipped corners or rims
- A tray that flexes
- Damage from a refit or building work
- Damage around the waste
Questions to ask before booking
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- Who will actually do the work
- The length of the guarantee and what it covers
Covering Furnace End
Furnace End is about 7 miles west of Nuneaton, in Warwickshire. From the centre of Furnace End to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Furnace End is one of 324 towns and villages in Warwickshire we cover. You can also see our page for Birmingham, about 11 miles away.
Jobs in B46 work the same way as everywhere else we cover. You’ll find streets such as Nuneaton Road and Bray Bank, and we cover them all. Other places close to Furnace End include Over Whitacre (1 mile north), Church End (1 mile south-west), Botts Green (1 mile north-west), Monwode Lea (1 mile east) and Shustoke (1 mile west). We also work in nearby towns such as Nuneaton (7 miles east), Bedworth (7 miles south-east), Kenilworth (12 miles south), Fordbridge (5 miles south-west), Atherstone (5 miles north-east) and Castle Vale (6 miles west).
Around Furnace End
Around Furnace End, we work in homes near Church of St Leonard and the streets around them. For rail, the closest station is Coleshill Parkway station, roughly 3.2 miles west of the centre. A little further out are Brooklands Hospital (5.8 miles south-west) and Maxstoke Castle (2.1 miles south-west). Green spaces nearby include Ladywalk Reserve.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Don’t use strong acids or bleach
- Keep the bathroom well ventilated
- Don’t ignore a tray that flexes
- Rinse away soap after showering
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
Do not keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you cannot see.
About our accreditations · Every repair comes with a one-year guarantee.
