Nottingham · England

uPVC window & door repair in Whitemoor, Nottingham

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for homes and businesses in Whitemoor and across Nottingham. Free, fixed quotes from your photos.

  • Repairs from £95
  • Chips and dents
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Whitemoor?

uPVC repair in Whitemoor without replacing anything

We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. Common call-outs are for holes from removed fittings and alarms and chips and dents, on conservatory frames, white uPVC and doors & door panels.

You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Where
Whitemoor (NG7, NG8, NG6)
Region
Nottingham
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped white edge filled and refinished

Repair or replace in Whitemoor?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why Whitemoor customers choose us

  • Dust sheets down, tidy finish
  • Colour mixed on the day to match
  • Most jobs done in one visit
  • Every repair guaranteed for a year

Take a look at our full price list.

What uPVC repair costs

Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • How much damage there is
  • How hard the colour is to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

We price nearly every job from pictures. This is what we need:

  • Whether it’s been repaired or coated before
  • One picture of the entire window, door or sill
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Common problems we fix in Whitemoor

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

Look out for any of the following:

  • Burns on sills
  • Damage during building work
  • Chips and dents
  • Holes from removed fittings and alarms

Comparing quotes

  • Whether the price is fixed and includes VAT
  • How long the guarantee is and what it covers
  • If travel is included in the price
  • What happens if the damage is worse than the photos show

How to compare quotes

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How the visit works

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon. Before we go, we will explain how long to leave it and how to look after it.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. Finally we blend it into the rest of the frame.

Getting ready for the visit

  • Let us know about parking or access
  • Make sure the room can be ventilated
  • Tell us about any previous repairs or coatings

Getting a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Advice

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • White uPVC
  • Window frames & sills

FAQs for Whitemoor

Do you cover Whitemoor?

Yes, we do. We send a technician to Whitemoor for every job, with no extra charge for travel.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Do you repair coloured uPVC?

Yes. Colour and grain are matched by hand.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

What areas do you cover?

Across the UK, and that includes Whitemoor. Our prices are the same everywhere.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Whitemoor and the surrounding area

Whitemoor is about 1 mile west of Nottingham, in Nottingham. We visit clients in Whitemoor, so nothing has to leave your home. We work in 51 places across Nottingham, from the larger towns to small villages. Our nearest city page is Birmingham, about 46 miles away.

Postcode districts we cover here: NG7, NG8 and NG6. Whether you live on Craven Road, Cyril Avenue and Radford Road or a nearby road, a technician can come to you. Main roads around Whitemoor include the A610 and A6514, which makes travel easy. If you are just outside Whitemoor, we cover Nottingham (1 mile east), Old Basford (1 mile north), Basford (1 mile north-east), New Basford (1 mile east) and Sherwood Rise (1 mile east). Further out, we also cover Arnold (3 miles north-east), Clifton (5 miles south), Daybrook (3 miles north-east), Compton Acres (4 miles south), Mapperley (3 miles east) and Wollaton (3 miles south-west).

Around Whitemoor

Around Whitemoor, we work in homes near Melbourne Park, Berridge Primary and Nursery School and The Nottingham Bluecoat Academy. You will also find Newcastle Arms (0.5 miles north-west), St. Stephen's Church (under half a mile east) and William Crane Comprehensive School (0.9 miles north-west). The nearest railway station is Bulwell station, about 2.1 miles north of the centre. Other landmarks nearby include North Wilford (2.4 miles south) and Nottingham Castle (1.9 miles south-east). Open spaces near Whitemoor include Wilford Hill and Colwick Woods.

Map of Whitemoor © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.