Nottingham · England
Bath chip & crack repair in Whitemoor, Nottingham
Bath repair across Whitemoor and nearby, usually in one visit and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- A chip where the taps sit
About our bath repair in Whitemoor
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. Typical jobs include a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath, on pressed steel enamel, acrylic and whirlpool & spa baths.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Whitemoor (NG7, NG8, NG6)
- County
- Nottingham
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Whitemoor
Whitemoor is about 1 mile west of Nottingham, in Nottingham. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Whitemoor is one of 51 places in Nottingham where we work. Our jobs stretch from Whitemoor to Birmingham (46 miles away).
Here we cover the NG7, NG8 and NG6 postcode area. Streets in the area include Craven Road, Cyril Avenue and Radford Road, and we cover them all. Whitemoor is on the A610 and A6514, so it’s easy for us to reach. Other places close to Whitemoor include Nottingham (1 mile east), Old Basford (1 mile north), Basford (1 mile north-east), New Basford (1 mile east) and Sherwood Rise (1 mile east). Larger places within reach include Arnold (3 miles north-east), Clifton (5 miles south), Daybrook (3 miles north-east), Compton Acres (4 miles south), Mapperley (3 miles east) and Wollaton (3 miles south-west).
What’s near Whitemoor
Around Whitemoor, we work in homes near Melbourne Park, Berridge Primary and Nursery School and The Nottingham Bluecoat Academy. You will also find Newcastle Arms (0.5 miles north-west), St. Stephen's Church (less than half a mile east) and William Crane Comprehensive School (0.9 miles north-west). Whitemoor’s nearest station is Bulwell station, roughly 2.1 miles north of the centre. A little further out are North Wilford (2.4 miles south) and Nottingham Castle (1.9 miles south-east). Not far away are Wilford Hill and Colwick Woods.
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- Acrylic cracks with no access behind them
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
How the visit works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the following day, the bath is ready to use.
How to prepare
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Ask for a price
For a price in Whitemoor, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
FAQs for Whitemoor
How much does bath repair cost in Whitemoor?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your NG7 postcode.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
When can I have a bath again?
Normally by the following day, depending on the repair.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Nearby places to Whitemoor
Other services in Whitemoor
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. Generally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Generally one visit, start to finish
Take a look at our full price list or bath cost comparison.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- How many areas need work
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Any details about the material
- A picture taken from further back
- One sharp close-up of the damage
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Landlords, agents and businesses in Whitemoor
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
