Nottingham · England
Bath re-enamelling & resurfacing in Whitemoor, Nottingham
Damaged bath in Whitemoor? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
Bath re-enamelling at your home in Whitemoor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix stains that won’t shift and a roll-top that’s seen better days, across acrylic baths, pressed steel baths and Victorian roll-tops.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Whitemoor (NG7, NG8, NG6)
- County
- Nottingham
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Questions from Whitemoor
What happens once I’ve sent pictures?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Do you cover Whitemoor?
Yes. We work across the UK and travel to Whitemoor and the rest of Nottingham. Send us pictures for a fixed quote, or call 0345 017 0787.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Where we work around Whitemoor
Whitemoor is about 1 mile west of Nottingham, in Nottingham. Across the NG7 area, a technician comes to you. Our technicians cover 51 places across Nottingham, from the larger towns to small villages. You can also see our page for Birmingham, about 46 miles away.
Postcode districts we cover here: NG7, NG8 and NG6. Local streets include Craven Road, Cyril Avenue and Radford Road. Being close to the A610 and A6514, Whitemoor is simple for us to get to. We also cover the places around Whitemoor: Nottingham (1 mile east), Old Basford (1 mile north), Basford (1 mile north-east), New Basford (1 mile east) and Sherwood Rise (1 mile east). Further out, we also cover Arnold (3 miles north-east), Clifton (5 miles south), Daybrook (3 miles north-east), Compton Acres (4 miles south), Mapperley (3 miles east) and Wollaton (3 miles south-west).
Near you in Whitemoor
Locally, our jobs take us to homes close to Melbourne Park, Berridge Primary and Nursery School and The Nottingham Bluecoat Academy. You’ll also find Newcastle Arms (0.5 miles north-west), St. Stephen's Church (under half a mile east) and William Crane Comprehensive School (0.9 miles north-west). Whitemoor’s nearest station is Bulwell station, roughly 2.1 miles north of the centre. Well-known places in the area include North Wilford (2.4 miles south) and Nottingham Castle (1.9 miles south-east). For a walk, there’s Wilford Hill and Colwick Woods.
Common problems we fix in Whitemoor
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things customers generally mention when they call are:
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
- Thin, worn enamel in places
What to look for in a quote
- The length of the guarantee and what it covers
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- How soon you can use it again
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Clear the area around the damage
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
Landlord and trade work in Whitemoor
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
When we would advise against a repair
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Aftercare tips
Simple care helps the repair last. Our advice:
- Do not leave a chip unrepaired
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why Whitemoor clients choose us
- Normally one visit, start to finish
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Fixed prices from your pictures
Read our pricing or guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
- How many items we do on one visit
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Details of any past repairs
- One picture of the whole bath
- Any details about the material
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Towns and villages near Whitemoor
What else we do in Whitemoor
About our accreditations · Every repair comes with a one-year guarantee.
