East Sussex · England

Worktop repair in Blackness, East Sussex

Worktop repair in Blackness without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Chips caused during installation
  • Scratches and knife marks
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Blackness

How we handle worktop repair in Blackness

You do not need a new worktop because of one mark. We fill and refinish the damage so it blends into the pattern. If you are dealing with a heat mark or burn and snagging damage in a new kitchen, we can help, on solid wood, granite & marble and solid surface (such as Corian) alike.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.

Area
Blackness (BN24)
Area hub
East Sussex
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

Repairs by material

Quartz

Quartz is tough, though edges can chip. Chips are filled with tinted resin and polished.

Laminate

A laminate worktop is a thin decorative layer on a board. We fill damage and paint in the pattern by hand.

When to call us in Blackness

Edges and corners chip most frequently, often when something heavy catches the edge.

Clients typically contact us about:

  • A heat mark or burn
  • A damaged sink edge
  • Knife marks
  • Chipped corners

What your quote should include

  • How the room is protected while they work
  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel
  • When it can be used again

Our hiring checklist

Blackness and the surrounding area

Blackness is about 2 miles north of Eastbourne, in East Sussex. We travel to clients in Blackness and the surrounding area, so you do not need to take anything anywhere. Blackness is one of 289 towns and villages in East Sussex where we work. You can also see our page for London, about 50 miles away.

All of BN24 is within our area. Streets in the area include Forge Place, Hailsham Road and Hankham Road, and we cover them all. Nearby, we also work in Hankham (1 mile north-east), Stone Cross (1 mile south-east), Polegate (2 miles west), Lower Willingdon (2 miles south-west) and Willingdon (2 miles south-west). We also work in nearby towns such as Hastings (12 miles east), Bexhill-on-Sea (8 miles east), Seaford (9 miles west), Lewes (13 miles west), Hailsham (3 miles north-west) and St Leonards (12 miles east).

Landmarks near Blackness

Around Blackness, we work in homes near St Luke's Church, The Red Lion pub and Stone Cross School and the streets around them. The closest station to Blackness is Pevensey & Westham station, roughly 1.5 miles east of the centre. Further afield, we also cover the area around Pevensey Court House Museum And Gaol (1.9 miles east) and Eastbourne District General Hospital (2.5 miles south-west). Not far away are Combe Hill.

Map of Blackness © OpenStreetMap contributors

Questions from Blackness

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can you repair a chipped quartz worktop?

Yes. We match the colour and polish the repair.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will the repair match a patterned worktop?

We match colour, flecks and veining by hand, so the repair blends into the surface.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

What happens on the day

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. We start by checking the damage and the worktop material.
  2. We clean the area and prepare the edges of the damage.
  3. We fill the damage with a suitable filler and build up any lost edge.
  4. We match the colour and pattern by hand.
  5. We seal or finish the surface to suit the worktop.

How to prepare

  • Let us know which floor the room is on
  • Make sure the room can be ventilated
  • Have somewhere for us to park nearby if possible

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed quote

Read more

Should you replace it?

A new worktop means removing the old one, templating and fitting a replacement and reconnecting the sink and hob, and it may not match the rest of the kitchen. Repairing the damage keeps your existing worktop. Prices start from £95. We charge the same wherever you are, with no extra for Blackness. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • One price list for the entire UK
  • Typically one visit, start to finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted

See our full price list.

Prices and what affects them

Prices start from £95. Quotes are free and the price is fixed. What we take into account:

  • The material
  • How many areas need work
  • Unusual colours or finishes
  • How many items we do on one visit

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Something in shot to show the size
  • Details of any past repairs
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole worktop, we can price the job.

What we can’t put right

To be straight with you, there are a few things a repair won’t fix:

  • Cracks right through stone that has moved
  • Deep heat discolouration in quartz, which may not fully disappear
  • A top that moves on its units

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Granite & marble
  • Solid wood
  • Quartz
  • Laminate
  • Solid surface (such as Corian)

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.