Pembrokeshire · Wales
Worktop Repair in Burton Ferry
Worktop repair across Burton Ferry and nearby, generally in one visit and guaranteed for a year.
- Repairs from £95
- Gouges in the surface
- Knife marks
How we handle worktop repair in Burton Ferry
A damaged worktop doesn’t have to mean a new kitchen. The damage is filled and refinished so it blends into the pattern. If you are dealing with chips in quartz or granite and a dent from a dropped pan, we can typically put it right.
All our work is covered by our one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Burton Ferry (SA73)
- Area hub
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What worktop repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- Whether we combine several jobs
- What kind of damage it is
- How many areas need work
- Previous DIY repairs that have to come out
We charge the same wherever you are, so there is no premium for Burton Ferry. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Two or three clear pictures are generally enough. Try to include:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Details of any past repairs
- A picture taken from further back
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire worktop, we can give you a fixed quote.
Looking after it afterwards
So the finish stays in good condition for years:
- Watch the edges with heavy pans
- Steer clear of strong cleaners
- Clean spills right away
- Don’t cut directly on the worktop
Wipe water away from joints and around the sink, particularly with laminate and timber.
A chip on an edge can grow, and water can reach the core of laminate. Repairing it early stops that.
Burton Ferry questions
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is a burnt worktop repairable?
Normally, yes. The burn is cut back, filled and patterned to match.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
How much do I need to move?
Just clear the area around the damage. The rest is covered and protected.
Can you repair a chipped quartz worktop?
Yes. We repair quartz chips regularly, filled and polished to match.
Also near Burton Ferry
What else we do in Burton Ferry
Materials and what they mean for the repair
Wood
Wooden worktops can be sanded, filled and re-oiled, with burns and dents put right.
Laminate
Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated by hand.
About Burton Ferry
Burton Ferry is about 5 miles east of Milford Haven, in Pembrokeshire. Across the SA73 area, a technician comes to you. We cover all 223 towns and villages across Pembrokeshire.
Here we cover the SA73 postcode area. From Trinity Terrace and Barnlake Point or anywhere nearby, a technician can come to you. We also cover the places around Burton Ferry: Burton (1 mile east), Pembroke Ferry (1 mile south), Neyland (1 mile west), Great Honeyborough (1 mile west) and Houghton (1 mile north). Within a short drive, we also cover Haverfordwest (7 miles north), Milford Haven (5 miles west), The Marsh (7 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles west).
Local landmarks in Burton Ferry
In Burton Ferry, that means homes near Jolly Sailor pub, Church Of Saint Mary and Ysgol Harri Tudur/Henry Tudor School and the streets around them. For rail, the closest station is Pembroke Dock station, roughly 1.1 miles south. A little further out are Benton Castle (2 miles north-east) and Pembroke Dock Heritage Centre (1.4 miles south-west). Open spaces near Burton Ferry include Ferry Wood and Pembroke River lower.
- Local facilities include Pembroke Dock: Llanion (1.1 miles south)
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours for most jobs. We leave the room clean and ready to use once it has cured.
- First, we check the damage and the finish we need to match.
- Burnt or loose material is cut back.
- We fill and shape the damaged area.
- The pattern, flecks or grain are recreated.
- It’s finished to the same sheen and left to cure.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Make sure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Advice
Landlords, agents and businesses in Burton Ferry
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
When a repair isn’t the answer
It helps to know what we can’t do:
- A worktop that has moved because its support has failed
- Laminate that has blown or swollen
- A cracked stone top that’s unsupported
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Quartz
- Solid surface (such as Corian)
- Laminate
- Granite & marble
- Solid wood
Common problems we fix in Burton Ferry
Water around the sink can get into laminate and wood joints, and that can make them swell.
You may need us if you’ve spotted any of these:
- Chips on edges and corners
- Damage from fitting or building work
- Dents and gouges
- Scorch marks from pans
What to look for in a quote
- How to care for the finish
- What protection goes down before work starts
- Whether they match the colour on site
- What preparation is included
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
