Gloucestershire · England

Worktop repair in Daneway, Gloucestershire

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Daneway and across Gloucestershire. Free, fixed quotes from your photos.

  • Repairs from £95
  • A damaged sink edge
  • A chipped edge
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Daneway

About our worktop repair in Daneway

Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, matching the colour and pattern by hand. Nothing is taken out. Whether it’s chips on edges and corners and scratches and knife marks, we can usually put it right, whatever the material.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Daneway (GL7)
Area hub
Gloucestershire
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: damaged granite tiles repaired in place

How we price worktop repair

Repairs from £95. We do not charge extra for travel to Daneway. The price depends on:

  • Unusual colours or finishes
  • The material
  • Whether we combine several jobs
  • The size and number of damaged areas

We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

We price nearly every job from photos. This is what we need:

  • Your postcode, so we can check dates
  • Details of any past repairs
  • One sharp close-up of the damage
  • A picture taken from further back

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

When we would advise against a repair

We will not take on work that will not last, so these are the limits:

  • Severe heat marks in quartz
  • A top that moves on its units
  • Through cracks in stone that is moving

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Daneway

  • Granite & marble
  • Solid wood
  • Quartz
  • Laminate
  • Solid surface (such as Corian)

About Daneway

Daneway is about 5 miles west of Cirencester, in Gloucestershire. Across the GL7 area, a technician comes to you. We work in all 470 towns and villages across Gloucestershire. You can also see our page for Birmingham, about 52 miles away.

Our visits in GL7 work the same way as everywhere else we cover. If you are just outside Daneway, we cover Sapperton (1 mile east), Edgeworth (2 miles north), Coates (3 miles south-east), Duntisbourne Abbots (3 miles north-east) and Duntisbourne Leer (3 miles north-east). Within a short drive, we also cover Cheltenham (12 miles north), Gloucester (10 miles north-west), Stroud (6 miles west), St Paul's (12 miles north), Cirencester (5 miles east) and Lansdown (11 miles north).

Near you in Daneway

Around Daneway, we work in homes near Sapperton Church of England Primary School, Daneway Inn and St Kenelm's Church. For rail, the closest station is Kemble station, about 4.6 miles south-east of the centre. Well-known places in the area include Cirencester Hospital (5 miles east) and Arcade Archive (3.3 miles west). Not far away are Siccaridge Wood.

Map of Daneway © OpenStreetMap contributors

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What your worktop is made of matters

Granite and stone

Granite and stone chip at edges and cut-outs. We fill and polish the repair to match the stone.

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

Repair or replace: which is better?

If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, repair is normally far better value. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Daneway

  • A fixed quote before you book
  • Work done at your home or business
  • Rooms protected and left tidy
  • One-year guarantee on every repair

Read our prices page.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Clean spills immediately
  • Always use a trivet for hot pans
  • Steer clear of strong cleaners
  • Use a chopping board

Always use a trivet and chopping board, wipe spills immediately, and re-oil wooden worktops regularly.

A chip on an edge can grow, and on laminate, water can get into the core. Repairing it early stops that.

FAQs for Daneway

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Do you come to Daneway?

We do. We send a technician to Daneway for every job, and the price is the same as everywhere else.

Will there be a smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

How much do I need to move?

Just near the damage. You can generally still use the rest of the kitchen.

Can you match granite flecks?

Yes. We recreate the pattern by hand.

The process

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage, and we’ll keep you posted as we go.

  1. First, we check the damage and the finish we need to match.
  2. Burnt or loose material is cut back.
  3. The area is filled and shaped.
  4. The pattern, flecks or grain are recreated.
  5. It’s finished to the same sheen and left to cure.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Let us know which floor the room is on

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Get a free quote

Advice

Common problems we fix in Daneway

Most chips are on edges and corners, usually from pans, tins or dishes knocked against them.

Keep an eye out for any of the following:

  • Scratches and knife marks
  • Chipped corners
  • Gouges in the surface
  • A heat mark or burn

What your quote should include

  • Whether the price is fixed and includes VAT
  • Who turns up on the day
  • Whether cleaning and preparation are in the price
  • How changes to the job are handled

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.